Nicht integeres RAID 5 wiederherstellen…
Willkommen in der Mk-Community › Foren › Hardware › PC Komponenten › Laufwerke › Nicht integeres RAID 5 wiederherstellen…
- Dieses Thema hat 7 Antworten und 5 Teilnehmer, und wurde zuletzt aktualisiert vor 12 Jahren, 11 Monaten von spokekiller.
-
AutorBeiträge
-
-
1. Mai 2011 um 15:05 Uhr #499031BörniTeilnehmer
Moin Moin,
Ich hab mir vor ca einem Jahr ein RAID5 aus 5 Stück WD10EVDS zusammengestellt, auf Linux-Software-RAID Basis (mdadm)…
…nun
Eine WD10EVDS macht gerade den Bach runter. Die Anzahl der defekten Sektoren steigt von Tag zu Tag, das RAID wollte sich schon neu synchronisieren, um sich auf die mittlerweile ein paar Sektoren kleinere Platte einzustellen da habe ich sie erstmal rausgenommen.
Nun habe ich ein paar Fragen.
-kann ich jede beliebige Terabyte Festplatte nehmen, um die alte Festplatte zu ersetzen? (Ja ich weiß, ich hätte nicht so größengeil sein dürfen und ich hätte eine Sparefestplatte einrichten sollen…)
-die WD10EVDS ist ja mittlerweile kaum beziehbar (nur sauteuer über amazon), die gabs damals als Schnäppchen-Angebot bei Alternate Zack-Zack-greift die WD Warranty in diesem Falle?
Hier mal die Ausgabe von dmesg, sollte alles sagen!
Die defekte Festplatte ist /dev/sdc
[SPOILER][CODE]aps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.526915] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.527118] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.527301] system 00:02: [io 0x040b] has been reserved
[ 0.527484] system 00:02: [io 0x04d6] has been reserved
[ 0.527666] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.527850] system 00:02: [io 0x0c14] has been reserved
[ 0.528044] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.528227] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.528410] system 00:02: [io 0x0c6f] has been reserved
[ 0.528593] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.528776] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.528959] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.529155] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.529339] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.529521] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.529704] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.529887] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.530084] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.530413] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530489] pnp 00:03: [dma 4]
[ 0.530491] pnp 00:03: [io 0x0000-0x000f]
[ 0.530492] pnp 00:03: [io 0x0080-0x0090]
[ 0.530493] pnp 00:03: [io 0x0094-0x009f]
[ 0.530495] pnp 00:03: [io 0x00c0-0x00df]
[ 0.530572] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.530598] pnp 00:04: [irq 0 disabled]
[ 0.530607] pnp 00:04: [irq 8]
[ 0.530609] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.530657] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.530679] pnp 00:05: [io 0x0070-0x0073]
[ 0.530728] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.530734] pnp 00:06: [io 0x0061]
[ 0.530781] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.530787] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.530794] pnp 00:07: [irq 13]
[ 0.530842] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.531083] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.531089] pnp 00:08: [irq 4]
[ 0.531161] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.531319] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.531388] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.531572] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531679] pnp 00:0a: [mem 0x000d7400-0x000d7fff]
[ 0.531680] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.531681] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.531683] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.531684] pnp 00:0a: [mem 0xcfde0000-0xcfdeffff]
[ 0.531686] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.531687] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.531688] pnp 00:0a: [mem 0x00100000-0xcfddffff]
[ 0.531690] pnp 00:0a: [mem 0xcfdf0000-0xcfdfffff]
[ 0.531691] pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
[ 0.531693] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.531694] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.531695] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 0.531698] pnp 00:0a: disabling [mem 0x000d7400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.532052] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.532385] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.532718] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.533065] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.533399] pnp 00:0a: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.533841] system 00:0a: [mem 0xcfde0000-0xcfdeffff] could not be reserved
[ 0.534042] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.534226] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] has been reserved
[ 0.534410] system 00:0a: [mem 0xcfe00000-0xcfefffff] could not be reserved
[ 0.534595] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.534779] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.534964] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.535161] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.535176] pnp: PnP ACPI: found 11 devices
[ 0.535357] ACPI: ACPI bus type pnp unregistered
[ 0.540219] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.540548] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.540731] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.540915] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.541113] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.541443] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.541772] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.541954] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.542151] pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.542336] pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.542665] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.542848] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.543044] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.543229] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.543559] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
[ 0.543887] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.544082] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
[ 0.544266] pci 0000:00:07.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.544450] pci 0000:00:07.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.544780] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[ 0.544962] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.545159] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.545343] pci 0000:00:09.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.545673] pci 0000:06:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.546007] pci 0000:00:0a.0: PCI bridge to [bus 06-06]
[ 0.546195] pci 0000:00:0a.0: bridge window [io 0x9000-0x9fff]
[ 0.546379] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.546564] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.546894] pci 0000:00:14.4: PCI bridge to [bus 07-07]
[ 0.547090] pci 0000:00:14.4: bridge window [io 0x8000-0x8fff]
[ 0.547276] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.547462] pci 0000:00:14.4: bridge window [mem 0xfd500000-0xfd5fffff pref]
[ 0.547802] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.547987] pci 0000:00:02.0: setting latency timer to 64
[ 0.547995] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.548192] pci 0000:00:05.0: setting latency timer to 64
[ 0.548195] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548379] pci 0000:00:06.0: setting latency timer to 64
[ 0.548387] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.548572] pci 0000:00:07.0: setting latency timer to 64
[ 0.548575] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.548759] pci 0000:00:09.0: setting latency timer to 64
[ 0.548762] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548946] pci 0000:00:0a.0: setting latency timer to 64
[ 0.548952] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.548954] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.548955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.548957] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.548958] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.548960] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.548961] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.548963] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.548965] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.548966] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.548968] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.548969] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.548971] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.548972] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.548974] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.548975] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.548977] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.548978] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.548980] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.548981] pci_bus 0000:05: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.548983] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.548984] pci_bus 0000:06: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.548986] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.548988] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 0.548989] pci_bus 0000:07: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.548991] pci_bus 0000:07: resource 2 [mem 0xfd500000-0xfd5fffff pref]
[ 0.548992] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.548994] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.548995] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.548996] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.548998] pci_bus 0000:07: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.549081] NET: Registered protocol family 2
[ 0.549325] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.550160] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.551363] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.551777] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.551961] TCP reno registered
[ 0.552152] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.552367] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.552677] NET: Registered protocol family 1
[ 0.552968] RPC: Registered udp transport module.
[ 0.553168] RPC: Registered tcp transport module.
[ 0.553349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.553538] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553542] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553544] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.553548] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553550] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553552] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xa8
[ 0.553555] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553557] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553559] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xa8
[ 0.553561] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553563] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553565] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xa8
[ 0.553568] pci 0000:00:07.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553570] pci 0000:00:07.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553572] pci 0000:00:07.0: calling pci_fixup_video+0x0/0xa8
[ 0.553575] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553577] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553579] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xa8
[ 0.553581] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553583] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553585] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xa8
[ 0.553588] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x38
[ 0.553592] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553594] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.553596] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xa8
[ 0.553599] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.553601] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.578043] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xa8
[ 0.578052] pci 0000:00:12.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.578054] pci 0000:00:12.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.602044] pci 0000:00:12.1: calling pci_fixup_video+0x0/0xa8
[ 0.602053] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x29
[ 0.602055] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.602098] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xa8
[ 0.602102] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.602104] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.626043] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xa8
[ 0.626052] pci 0000:00:13.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.626055] pci 0000:00:13.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650043] pci 0000:00:13.1: calling pci_fixup_video+0x0/0xa8
[ 0.650052] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650054] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650097] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xa8
[ 0.650101] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650103] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650105] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xa8
[ 0.650109] pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650111] pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650113] pci 0000:00:14.1: calling pci_fixup_video+0x0/0xa8
[ 0.650116] pci 0000:00:14.2: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650118] pci 0000:00:14.2: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650120] pci 0000:00:14.2: calling pci_fixup_video+0x0/0xa8
[ 0.650124] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650126] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650127] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xa8
[ 0.650131] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650133] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.650135] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xa8
[ 0.650138] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x29
[ 0.650140] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674043] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xa8
[ 0.674052] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674054] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674056] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xa8
[ 0.674059] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674061] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674063] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xa8
[ 0.674066] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674068] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674069] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xa8
[ 0.674072] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674074] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674076] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xa8
[ 0.674078] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674080] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674082] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xa8
[ 0.674085] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xf
[ 0.674092] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674094] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674096] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674098] pci 0000:01:00.0: Boot video device
[ 0.674101] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674103] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674105] pci 0000:02:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674108] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674110] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674112] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674116] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674118] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674119] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xa8
[ 0.674123] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674125] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674127] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674131] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674133] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674176] pci 0000:05:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674179] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674181] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674183] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xa8
[ 0.674187] pci 0000:07:06.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674189] pci 0000:07:06.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674191] pci 0000:07:06.0: calling pci_fixup_video+0x0/0xa8
[ 0.674195] pci 0000:07:06.1: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674196] pci 0000:07:06.1: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674198] pci 0000:07:06.1: calling pci_fixup_video+0x0/0xa8
[ 0.674202] pci 0000:07:07.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674204] pci 0000:07:07.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674206] pci 0000:07:07.0: calling pci_fixup_video+0x0/0xa8
[ 0.674210] pci 0000:07:0e.0: calling quirk_cardbus_legacy+0x0/0x29
[ 0.674212] pci 0000:07:0e.0: calling quirk_usb_early_handoff+0x0/0x4c2
[ 0.674214] pci 0000:07:0e.0: calling pci_fixup_video+0x0/0xa8
[ 0.674217] PCI: CLS 64 bytes, default 64
[ 0.681479] PCI-DMA: Disabling AGP.
[ 0.681797] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.681980] PCI-DMA: using GART IOMMU.
[ 0.682181] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.686145] Machine check injector initialized
[ 0.686852] microcode: CPU0: patch_level=0x1000086
[ 0.687060] microcode: CPU1: patch_level=0x1000086
[ 0.687250] microcode: CPU2: patch_level=0x1000086
[ 0.687448] microcode: CPU3: patch_level=0x1000086
[ 0.687695] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.688108] Intel AES-NI instructions are not detected.
[ 0.689055] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.689900] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.690214] fuse init (API version 7.16)
[ 0.690478] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.691155] msgmni has been set to 15979
[ 0.692101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.696212] io scheduler noop registered
[ 0.696393] io scheduler deadline registered
[ 0.696617] io scheduler cfq registered (default)
[ 0.696916] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.696935] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696994] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.697026] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.697119] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.697133] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.697189] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.697203] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[ 0.697258] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.697273] pcieport 0000:00:09.0: irq 44 for MSI/MSI-X
[ 0.697327] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.697342] pcieport 0000:00:0a.0: irq 45 for MSI/MSI-X
[ 0.697634] Linux agpgart interface v0.103
[ 0.752370] uvesafb: NVIDIA Corporation, NVIDIA G92-03930054, Chip Rev , OEM: NVIDIA, VBE v3.0
[ 0.858600] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 0.929631] uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
[ 0.930062] uvesafb: scrolling: redraw
[ 1.166931] Console: switching to colour frame buffer device 210×65
[ 1.169729] uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010100000, using 13781k, total 14336k
[ 1.169731] fb0: VESA VGA frame buffer device
[ 1.169835] ACPI: acpi_idle registered with cpuidle
[ 1.202843] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.223474] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.304751] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.688084] Refined TSC clocksource calibration: 3604.215 MHz.
[ 1.688096] Switching to clocksource tsc
[ 4.336039] floppy0: no floppy controllers found
[ 4.336243] brd: module loaded
[ 4.336821] loop: module loaded
[ 4.337140] ahci 0000:00:11.0: version 3.0
[ 4.337156] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.337254] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 4.337267] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 4.337870] scsi0 : ahci
[ 4.337976] scsi1 : ahci
[ 4.338059] scsi2 : ahci
[ 4.338136] scsi3 : ahci
[ 4.338257] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 4.338269] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 4.338281] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 4.338293] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 4.338325] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.338405] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 4.338418] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.338432] ahci 0000:03:00.0: setting latency timer to 64
[ 4.338785] scsi4 : ahci
[ 4.338867] scsi5 : ahci
[ 4.338933] ata5: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
[ 4.338945] ata6: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
[ 4.338971] ahci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.339028] ahci 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.350081] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 4.350095] ahci 0000:04:00.0: flags: 64bit ncq pio
[ 4.350105] ahci 0000:04:00.0: setting latency timer to 64
[ 4.351294] scsi6 : ahci
[ 4.351385] scsi7 : ahci
[ 4.351459] scsi8 : ahci
[ 4.351534] scsi9 : ahci
[ 4.352022] scsi10 : ahci
[ 4.352496] scsi11 : ahci
[ 4.352963] scsi12 : ahci
[ 4.353402] scsi13 : ahci
[ 4.353849] ata7: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff100 irq 46
[ 4.354218] ata8: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff180 irq 46
[ 4.354577] ata9: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff200 irq 46
[ 4.354933] ata10: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff280 irq 46
[ 4.355293] ata11: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff300 irq 46
[ 4.355640] ata12: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff380 irq 46
[ 4.355983] ata13: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff400 irq 46
[ 4.356331] ata14: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff480 irq 46
[ 4.356965] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.357675] scsi14 : pata_atiixp
[ 4.358128] scsi15 : pata_atiixp
[ 4.358960] ata15: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 4.359301] ata16: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 4.359951] PPP generic driver version 2.4.2
[ 4.360331] PPP Deflate Compression module registered
[ 4.360632] PPP BSD Compression module registered
[ 4.361091] PPP MPPE Compression module registered
[ 4.361403] NET: Registered protocol family 24
[ 4.361768] rtl8180 0000:07:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.362154] rtl8180 0000:07:07.0: enabling Mem-Wr-Inval
[ 4.481080] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481083] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481085] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481087] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481088] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481090] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481091] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481093] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481095] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481096] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481098] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481099] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481101] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481103] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481104] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481106] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481107] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481109] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481110] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481112] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481113] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481115] cfg80211: 2402000 KHz – 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481117] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481119] cfg80211: 2457000 KHz – 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481120] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481122] cfg80211: 2457000 KHz – 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481123] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4.481125] cfg80211: 2474000 KHz – 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 4.481139] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’
[ 4.481335] ieee80211 phy0: hwaddr 00e0611f0129, RTL8185vD + rtl8225z2
[ 4.481749] firewire_ohci 0000:07:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.524511] ata16.00: ATA-8: WDC WD10EVDS-63N5B1, 01.01A01, max UDMA/133
[ 4.524819] ata16.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.525265] ata16.01: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[ 4.525606] ata16.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.529509] ata16.00: configured for UDMA/100
[ 4.533111] firewire_ohci: Added fw-ohci device 0000:07:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.533654] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 4.534029] ata16.01: configured for UDMA/100
[ 4.534036] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.534047] ehci_hcd 0000:00:12.2: enabling bus mastering
[ 4.534050] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 4.534126] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.542034] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.542388] ehci_hcd 0000:00:12.2: debug port 1
[ 4.542736] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval
[ 4.542755] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 4.549022] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.549473] hub 1-0:1.0: USB hub found
[ 4.549826] hub 1-0:1.0: 6 ports detected
[ 4.550237] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.550612] ehci_hcd 0000:00:13.2: enabling bus mastering
[ 4.550615] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.551057] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.558028] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.558382] ehci_hcd 0000:00:13.2: debug port 1
[ 4.558749] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval
[ 4.558767] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 4.565040] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.565488] hub 2-0:1.0: USB hub found
[ 4.565848] hub 2-0:1.0: 6 ports detected
[ 4.566295] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 4.566674] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.567055] ohci_hcd 0000:00:12.0: enabling bus mastering
[ 4.567059] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 4.567491] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 4.580052] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 4.635167] hub 3-0:1.0: USB hub found
[ 4.635513] hub 3-0:1.0: 3 ports detected
[ 4.635931] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.636317] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 4.636763] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 4.643055] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.643060] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.643086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.643111] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.643868] ata4.00: ATA-8: WDC WD10EVDS-63N5B1, 01.01A01, max UDMA/133
[ 4.643871] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.644133] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[ 4.644135] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.644303] ata2.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[ 4.644305] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.644696] ata4.00: configured for UDMA/133
[ 4.645581] ata2.00: configured for UDMA/133
[ 4.646195] ata1.00: configured for UDMA/133
[ 4.646281] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 4.646421] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.646443] sd 0:0:0:0: [sda] Write Protect is off
[ 4.646445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.646454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.646521] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.646634] scsi 1:0:0:0: Direct-Access ATA WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[ 4.646778] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.646833] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.646835] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.646837] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.646863] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.651537] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.652035] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 4.653773] sda: sda1 sda2 sda3
[ 4.654428] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.663045] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.663457] ata13: SATA link down (SStatus 0 SControl 300)
[ 4.663867] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.664271] ata11: SATA link down (SStatus 0 SControl 300)
[ 4.664672] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.665070] ata12: SATA link down (SStatus 0 SControl 300)
[ 4.665472] ata10: SATA link down (SStatus 0 SControl 300)
[ 4.665853] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 4.666252] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.666684] ata14.00: configured for UDMA/66
[ 4.707153] hub 4-0:1.0: USB hub found
[ 4.707515] hub 4-0:1.0: 3 ports detected
[ 4.707953] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.708379] ohci_hcd 0000:00:13.0: enabling bus mastering
[ 4.708382] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.708853] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.716033] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 4.771156] hub 5-0:1.0: USB hub found
[ 4.771517] hub 5-0:1.0: 3 ports detected
[ 4.771952] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.772376] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.772848] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 4.780034] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 4.835152] hub 6-0:1.0: USB hub found
[ 4.835519] hub 6-0:1.0: 3 ports detected
[ 4.835962] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.836389] ohci_hcd 0000:00:14.5: enabling bus mastering
[ 4.836392] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.836867] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4.844033] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 4.852023] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.898028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.899146] hub 7-0:1.0: USB hub found
[ 4.899525] hub 7-0:1.0: 2 ports detected
[ 4.900037] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.900462] ata3.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[ 4.900464] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 4.900466] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 4.900537] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[ 4.901603] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.904404] ata3.00: configured for UDMA/133
[ 4.904864] scsi 2:0:0:0: Direct-Access ATA WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[ 4.905416] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.905471] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.905566] scsi 3:0:0:0: Direct-Access ATA WDC WD10EVDS-63N 01.0 PQ: 0 ANSI: 5
[ 4.905704] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.905751] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.905756] sd 3:0:0:0: [sdd] Write Protect is off
[ 4.905758] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.905778] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.905947] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 4.906099] scsi 13:0:0:0: Attached scsi generic sg4 type 3
[ 4.906177] scsi 15:0:0:0: Direct-Access ATA WDC WD10EVDS-63N 01.0 PQ: 0 ANSI: 5
[ 4.906309] sd 15:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.906362] sd 15:0:0:0: [sde] Write Protect is off
[ 4.906364] sd 15:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.906366] sd 15:0:0:0: Attached scsi generic sg5 type 0
[ 4.906381] sd 15:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.906443] scsi 15:0:1:0: Direct-Access ATA WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[ 4.906619] sd 15:0:1:0: Attached scsi generic sg6 type 0
[ 4.911733] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.912135] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.912144] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.913125] xhci_hcd 0000:05:00.0: enabling Mem-Wr-Inval
[ 4.913131] xhci_hcd 0000:05:00.0: irq 17, io mem 0xfd8fe000
[ 4.913573] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
[ 4.913575] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 4.913577] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 4.913579] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 4.913580] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[ 4.914601] sde: sde1
[ 4.914610] sd 15:0:1:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.914680] sd 15:0:1:0: [sdf] Write Protect is off
[ 4.914682] sd 15:0:1:0: [sdf] Mode Sense: 00 3a 00 00
[ 4.914701] sd 15:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.915509] sdd: sdd1
[ 4.916483] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 4.916559] xHCI xhci_add_endpoint called for root hub
[ 4.916561] xHCI xhci_check_bandwidth called for root hub
[ 4.916598] hub 8-0:1.0: USB hub found
[ 4.916600] hub 8-0:1.0: 4 ports detected
[ 4.916734] usbcore: registered new interface driver usblp
[ 4.916735] Initializing USB Mass Storage driver…
[ 4.916773] usbcore: registered new interface driver usb-storage
[ 4.916774] USB Mass Storage support registered.
[ 4.916827] usbcore: registered new interface driver usbserial
[ 4.916851] USB Serial support registered for generic
[ 4.920601] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.949633] sdc: sdc1
[ 4.950282] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.034094] firewire_core: created device fw0: GUID 00320093006cf049, S400
[ 5.142863] sdb: sdb1
[ 5.143503] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.172028] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 5.287907] usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2917
[ 5.429888] sdf: sdf1
[ 5.429932] sd 15:0:0:0: [sde] Attached SCSI disk
[ 5.430985] sd 15:0:1:0: [sdf] Attached SCSI disk
[ 5.505027] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 5.648080] usbcore: registered new interface driver usbserial_generic
[ 5.648530] usbserial: USB Serial Driver core
[ 5.649019] USB Serial support registered for GSM modem (1-port)
[ 5.649534] usbcore: registered new interface driver option
[ 5.649969] option: v0.7.2:USB Driver for GSM modems
[ 5.650528] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.651136] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.672659] mousedev: PS/2 mouse device common for all mice
[ 5.673265] i2c-core: driver [lm8323] using legacy suspend method
[ 5.673715] i2c-core: driver [lm8323] using legacy resume method
[ 5.674189] i2c-core: driver [max7359] using legacy suspend method
[ 5.674619] i2c-core: driver [max7359] using legacy resume method
[ 5.675246] rtc_cmos 00:05: RTC can wake from S4
[ 5.681084] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 5.681536] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.682050] i2c /dev entries driver
[ 5.682635] Linux video capture interface: v2.00
[ 5.683153] it87: Found IT8720F chip at 0x228, revision 8
[ 5.683625] it87: Routing internal VCCH to in7
[ 5.684080] it87: Beeping is supported
[ 5.684973] IT87 WDT: Chip IT8720 revision 8 initialized. timeout=60 sec (nowayout=0 testmode=0 exclusive=1 nogameport=0)
[ 5.685447] md: raid6 personality registered for level 6
[ 5.685915] md: raid5 personality registered for level 5
[ 5.686379] md: raid4 personality registered for level 4
[ 5.686937] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 5.687438] cpuidle: using governor ladder
[ 5.687885] cpuidle: using governor menu
[ 5.688409] sdhci: Secure Digital Host Controller Interface driver
[ 5.688854] sdhci: Copyright(c) Pierre Ossman
[ 5.695047] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input0
[ 5.695589] generic-usb 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0
[ 5.696093] usbcore: registered new interface driver usbhid
[ 5.696568] usbhid: USB HID core driver
[ 5.697110] Bt87x 0000:07:06.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.697667] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 5.698298] ALSA device list:
[ 5.698746] #1: Brooktree Bt878 at 0xfd5fe000, irq 20
[ 5.699224] Netfilter messages via NETLINK v0.30.
[ 5.699676] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.700399] IPv4 over IPv4 tunneling driver
[ 5.701232] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.701689] TCP cubic registered
[ 5.702121] NET: Registered protocol family 17
[ 5.702588] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor (4 cpu cores) (version 2.20.00)
[ 5.703064] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 5.703520] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 5.703972] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 5.704422] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.705203] registered taskstats version 1
[ 5.705975] rtc_cmos 00:05: setting system clock to 2011-04-30 10:24:00 UTC (1304159040)
[ 5.730837] md: Waiting for all devices to be available before autodetect
[ 5.732239] md: If you don’t use raid, use raid=noautodetect
[ 5.733976] md: Autodetecting RAID arrays.
[ 5.774377] md: invalid raid superblock magic on sdd1
[ 5.775769] md: sdd1 does not have a valid v0.90 superblock, not importing!
[ 5.814333] md: invalid raid superblock magic on sde1
[ 5.815695] md: sde1 does not have a valid v0.90 superblock, not importing!
[ 5.858733] md: invalid raid superblock magic on sdc1
[ 5.860119] md: sdc1 does not have a valid v0.90 superblock, not importing!
[ 5.865070] usb 6-2: new low speed USB device using ohci_hcd and address 2
[ 5.897744] md: invalid raid superblock magic on sdb1
[ 5.899129] md: sdb1 does not have a valid v0.90 superblock, not importing!
[ 5.930176] md: invalid raid superblock magic on sdf1
[ 5.931552] md: sdf1 does not have a valid v0.90 superblock, not importing!
[ 5.933082] md: Scanned 5 and added 0 devices.
[ 5.934605] md: autorun …
[ 5.936098] md: … autorun DONE.
[ 5.937878] EXT3-fs (sda1): error: couldn’t mount because of unsupported optional features (240)
[ 5.944274] EXT2-fs (sda1): error: couldn’t mount because of unsupported optional features (240)
[ 5.994709] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.995129] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 5.995701] Freeing unused kernel memory: 524k freed
[ 6.064328] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input1
[ 6.066061] generic-usb 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.1-2/input0
[ 6.545195] firewire_net: firewire0: IPv4 over FireWire on device 00320093006cf049
[ 6.546834] firewire_core: refreshed device fw0
[ 13.190941] <30>udev[4443]: starting version 167
[ 13.260677] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.260698] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.260704] r8169 0000:02:00.0: enabling Mem-Wr-Inval
[ 13.260745] r8169 0000:02:00.0: setting latency timer to 64
[ 13.260796] r8169 0000:02:00.0: irq 52 for MSI/MSI-X
[ 13.261121] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000007a000, d8:5d:4c:80:b5:47, XID 18000000 IRQ 52
[ 13.264035] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.264049] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.264053] r8169 0000:06:00.0: enabling Mem-Wr-Inval
[ 13.264076] r8169 0000:06:00.0: setting latency timer to 64
[ 13.264080] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, using family default
[ 13.264112] r8169 0000:06:00.0: irq 53 for MSI/MSI-X
[ 13.264361] r8169 0000:06:00.0: eth1: RTL8168b/8111b at 0xffffc9000006e000, 6c:f0:49:0a:1b:25, XID 083000c0 IRQ 53
[ 14.622628] md: bind
[ 14.628665] md: bind
[ 14.634223] md: bind
[ 14.640070] md: bind
[ 14.646229] md: bind
[ 14.649864] bio: create slabat 1
[ 14.649880] md/raid:md127: not clean — starting background reconstruction
[ 14.649903] md/raid:md127: device sdd1 operational as raid disk 1
[ 14.649909] md/raid:md127: device sde1 operational as raid disk 0
[ 14.649914] md/raid:md127: device sdf1 operational as raid disk 3
[ 14.649919] md/raid:md127: device sdc1 operational as raid disk 4
[ 14.649925] md/raid:md127: device sdb1 operational as raid disk 2
[ 14.650684] md/raid:md127: allocated 5330kB
[ 14.650771] md/raid:md127: raid level 5 active with 5 out of 5 devices, algorithm 2
[ 14.650778] RAID conf printout:
[ 14.650783] — level:5 rd:5 wd:5
[ 14.650788] disk 0, o:1, dev:sde1
[ 14.650793] disk 1, o:1, dev:sdd1
[ 14.650797] disk 2, o:1, dev:sdb1
[ 14.650801] disk 3, o:1, dev:sdf1
[ 14.650805] disk 4, o:1, dev:sdc1
[ 14.650863] md127: detected capacity change from 0 to 4000803979264
[ 14.653100] md127: unknown partition table
[ 16.094376] vboxdrv: Found 4 processor cores.
[ 16.094422] VBoxDrv: dbg – g_abExecMemory=ffffffffa00381c0
[ 16.094491] vboxdrv: fAsync=0 offMin=0x686 offMax=0x929a
[ 16.094527] vboxdrv: TSC mode is ‘synchronous’, kernel timer mode is ‘normal’.
[ 16.094529] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
[ 16.681823] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 17.738579] md: resync of RAID array md127
[ 17.738587] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 17.738593] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 17.738604] md: using 128k window, over a total of 976758784 blocks.
[ 20.715612] EXT4-fs (md127): recovery complete
[ 20.716260] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
[ 26.840839] r8169 0000:06:00.0: eth1: link down
[ 26.840850] r8169 0000:06:00.0: eth1: link down
[ 26.938870] r8169 0000:02:00.0: eth0: link down
[ 26.938882] r8169 0000:02:00.0: eth0: link down
[ 28.799180] r8169 0000:06:00.0: eth1: link up
[ 28.812556] r8169 0000:02:00.0: eth0: link up
[ 502.787680] oss_hdaudio 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 502.839153] usbcore: registered new interface driver oss_usb
[ 583.151966] nvidia: module license ‘NVIDIA’ taints kernel.
[ 583.151969] Disabling lock debugging due to kernel taint
[ 583.524830] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 583.524837] nvidia 0000:01:00.0: setting latency timer to 64
[ 583.524840] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 583.525163] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
[ 583.561939] ioremap error for 0x98000-0x99000, requested 0x10, got 0x0
[ 583.562402] ioremap error for 0xcfde3000-0xcfde4000, requested 0x10, got 0x0
[ 625.905096] ata1.00: configured for UDMA/133
[ 625.905099] ata1: EH complete
[ 626.128235] ata2.00: configured for UDMA/133
[ 626.128239] ata2: EH complete
[ 626.497915] ata3: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 626.497921] ata3: hard resetting link
[ 626.802029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 626.806115] ata3.00: configured for UDMA/133
[ 626.806118] ata3: EH complete
[ 627.121261] ata4.00: configured for UDMA/133
[ 627.121264] ata4: EH complete
[ 627.366465] ata16.00: configured for UDMA/100
[ 627.372464] ata16.01: configured for UDMA/100
[ 627.372467] ata16: EH complete
[ 627.491478] ata16.00: configured for UDMA/100
[ 627.497800] ata16.01: configured for UDMA/100
[ 627.497803] ata16: EH complete
[ 632.880183] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 632.884161] EXT4-fs (md127): re-mounted. Opts: commit=0
[ 2197.549937] ata3.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
[ 2197.549940] ata3.00: irq_stat 0x40000008
[ 2197.549944] ata3.00: cmd 60/f8:10:3f:34:36/00:00:44:00:00/40 tag 2 ncq 126976 in
[ 2197.549945] res 41/40:00:6d:34:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2197.553862] ata3.00: configured for UDMA/133
[ 2197.553869] ata3: EH complete
[ 2205.119295] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2205.119298] ata3.00: irq_stat 0x40000008
[ 2205.119303] ata3.00: cmd 60/f8:00:3f:34:36/00:00:44:00:00/40 tag 0 ncq 126976 in
[ 2205.119304] res 41/40:00:54:34:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2205.123021] ata3.00: configured for UDMA/133
[ 2205.123029] ata3: EH complete
[ 2246.839308] ata3.00: exception Emask 0x0 SAct 0x9 SErr 0x0 action 0x0
[ 2246.839310] ata3.00: irq_stat 0x40000008
[ 2246.839315] ata3.00: cmd 60/c8:00:37:35:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2246.839316] res 41/40:00:54:35:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2246.842971] ata3.00: configured for UDMA/133
[ 2246.842980] ata3: EH complete
[ 2277.728016] ata3.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 2277.728022] ata3.00: cmd 60/c8:08:37:35:36/01:00:44:00:00/40 tag 1 ncq 233472 in
[ 2277.728023] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2277.728027] ata3: hard resetting link
[ 2278.033025] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2278.036506] ata3.00: configured for UDMA/133
[ 2278.047008] ata3.00: device reported invalid CHS sector 0
[ 2278.047016] ata3: EH complete
[ 2308.704017] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 2308.704023] ata3.00: cmd 60/c8:00:37:35:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2308.704024] res 40/00:00:54:35:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 2308.704029] ata3: hard resetting link
[ 2309.009024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2309.012531] ata3.00: configured for UDMA/133
[ 2309.023015] ata3: EH complete
[ 2314.253000] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2314.253009] ata3.00: irq_stat 0x40000008
[ 2314.253014] ata3.00: cmd 60/c8:00:37:35:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2314.253015] res 41/40:00:3f:35:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2314.256685] ata3.00: configured for UDMA/133
[ 2314.256693] ata3: EH complete
[ 2327.072118] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2327.072121] ata3.00: irq_stat 0x40000008
[ 2327.072127] ata3.00: cmd 60/c8:00:37:35:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2327.072128] res 41/40:00:53:35:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2327.076739] ata3.00: configured for UDMA/133
[ 2327.076749] ata3: EH complete
[ 2341.478186] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2341.478189] ata3.00: irq_stat 0x40000008
[ 2341.478193] ata3.00: cmd 60/c8:00:37:35:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2341.478194] res 41/40:00:6f:35:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2341.481858] ata3.00: configured for UDMA/133
[ 2341.481868] sd 2:0:0:0: [sdc] Unhandled sense code
[ 2341.481869] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
[ 2341.481872] sd 2:0:0:0: [sdc] Sense Key : 0x3 [current] [descriptor]
[ 2341.481874] Descriptor sense data with sense descriptors (in hex):
[ 2341.481876] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2341.481881] 44 36 35 6f
[ 2341.481883] sd 2:0:0:0: [sdc] ASC=0x11 ASCQ=0x4
[ 2341.481885] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 44 36 35 37 00 01 c8 00
[ 2341.481889] end_request: I/O error, dev sdc, sector 1144403311
[ 2341.481903] ata3: EH complete
[ 2343.403717] md/raid:md127: read error corrected (8 sectors at 1144403192 on sdc1)
[ 2343.403722] md/raid:md127: read error corrected (8 sectors at 1144403200 on sdc1)
[ 2343.403724] md/raid:md127: read error corrected (8 sectors at 1144403208 on sdc1)
[ 2343.403726] md/raid:md127: read error corrected (8 sectors at 1144403216 on sdc1)
[ 2343.403728] md/raid:md127: read error corrected (8 sectors at 1144403224 on sdc1)
[ 2343.403730] md/raid:md127: read error corrected (8 sectors at 1144403232 on sdc1)
[ 2343.403732] md/raid:md127: read error corrected (8 sectors at 1144403240 on sdc1)
[ 2343.403733] md/raid:md127: read error corrected (8 sectors at 1144403248 on sdc1)
[ 2343.403735] md/raid:md127: read error corrected (8 sectors at 1144403256 on sdc1)
[ 2343.403737] md/raid:md127: read error corrected (8 sectors at 1144403264 on sdc1)
[ 2474.518745] ata3.00: exception Emask 0x0 SAct 0x30 SErr 0x0 action 0x0
[ 2474.518747] ata3.00: irq_stat 0x40000008
[ 2474.518753] ata3.00: cmd 60/f8:20:3f:20:36/00:00:44:00:00/40 tag 4 ncq 126976 in
[ 2474.518753] res 41/40:00:78:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2474.553077] ata3.00: configured for UDMA/133
[ 2474.553085] ata3: EH complete
[ 2499.635261] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2499.635264] ata3.00: irq_stat 0x40000008
[ 2499.635269] ata3.00: cmd 60/f8:08:3f:20:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2499.635270] res 41/40:00:da:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2499.639927] ata3.00: configured for UDMA/133
[ 2499.639934] ata3: EH complete
[ 2503.053581] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2503.053583] ata3.00: irq_stat 0x40000008
[ 2503.053588] ata3.00: cmd 60/f8:00:3f:20:36/00:00:44:00:00/40 tag 0 ncq 126976 in
[ 2503.053589] res 41/40:00:50:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2503.057556] ata3.00: configured for UDMA/133
[ 2503.057564] ata3: EH complete
[ 2511.111261] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2511.111263] ata3.00: irq_stat 0x40000008
[ 2511.111268] ata3.00: cmd 60/f8:08:3f:20:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2511.111269] res 41/40:00:62:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2511.115678] ata3.00: configured for UDMA/133
[ 2511.115685] ata3: EH complete
[ 2518.247735] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2518.247738] ata3.00: irq_stat 0x40000008
[ 2518.247742] ata3.00: cmd 60/f8:00:3f:20:36/00:00:44:00:00/40 tag 0 ncq 126976 in
[ 2518.247743] res 41/40:00:4a:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2518.251907] ata3.00: configured for UDMA/133
[ 2518.251914] ata3: EH complete
[ 2527.470781] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2527.470784] ata3.00: irq_stat 0x40000008
[ 2527.470789] ata3.00: cmd 60/f8:08:3f:20:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2527.470790] res 41/40:00:5d:20:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2527.474892] ata3.00: configured for UDMA/133
[ 2527.474903] sd 2:0:0:0: [sdc] Unhandled sense code
[ 2527.474905] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
[ 2527.474907] sd 2:0:0:0: [sdc] Sense Key : 0x3 [current] [descriptor]
[ 2527.474910] Descriptor sense data with sense descriptors (in hex):
[ 2527.474911] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2527.474916] 44 36 20 5d
[ 2527.474919] sd 2:0:0:0: [sdc] ASC=0x11 ASCQ=0x4
[ 2527.474921] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 44 36 20 3f 00 00 f8 00
[ 2527.474925] end_request: I/O error, dev sdc, sector 1144397917
[ 2527.474936] ata3: EH complete
[ 2535.561759] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2535.561761] ata3.00: irq_stat 0x40000008
[ 2535.561766] ata3.00: cmd 60/40:00:37:21:36/01:00:44:00:00/40 tag 0 ncq 163840 in
[ 2535.561767] res 41/40:00:44:21:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2535.566014] ata3.00: configured for UDMA/133
[ 2535.566020] ata3: EH complete
[ 2540.112240] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
[ 2540.112243] ata3.00: irq_stat 0x40000008
[ 2540.112248] ata3.00: cmd 60/40:00:37:21:36/01:00:44:00:00/40 tag 0 ncq 163840 in
[ 2540.112248] res 41/40:00:3a:21:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2540.116525] ata3.00: configured for UDMA/133
[ 2540.116533] ata3: EH complete
[ 2543.541750] ata3.00: exception Emask 0x0 SAct 0x5 SErr 0x0 action 0x0
[ 2543.541753] ata3.00: irq_stat 0x40000008
[ 2543.541758] ata3.00: cmd 60/40:10:37:21:36/01:00:44:00:00/40 tag 2 ncq 163840 in
[ 2543.541759] res 41/40:00:39:21:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2543.546152] ata3.00: configured for UDMA/133
[ 2543.546159] ata3: EH complete
[ 2551.854698] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2551.854700] ata3.00: irq_stat 0x40000008
[ 2551.854705] ata3.00: cmd 60/40:00:37:21:36/01:00:44:00:00/40 tag 0 ncq 163840 in
[ 2551.854706] res 41/40:00:56:21:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2551.859237] ata3.00: configured for UDMA/133
[ 2551.859244] ata3: EH complete
[ 2555.339610] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 2555.339612] ata3.00: irq_stat 0x40000008
[ 2555.339617] ata3.00: cmd 60/40:00:37:21:36/01:00:44:00:00/40 tag 0 ncq 163840 in
[ 2555.339618] res 41/40:00:39:21:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2555.343274] ata3.00: configured for UDMA/133
[ 2555.343283] sd 2:0:0:0: [sdc] Unhandled sense code
[ 2555.343284] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
[ 2555.343287] sd 2:0:0:0: [sdc] Sense Key : 0x3 [current] [descriptor]
[ 2555.343289] Descriptor sense data with sense descriptors (in hex):
[ 2555.343291] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2555.343296] 44 36 21 39
[ 2555.343298] sd 2:0:0:0: [sdc] ASC=0x11 ASCQ=0x4
[ 2555.343300] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 44 36 21 37 00 01 40 00
[ 2555.343304] end_request: I/O error, dev sdc, sector 1144398137
[ 2555.343315] ata3: EH complete
[ 2559.373908] raid5_end_read_request: 47 callbacks suppressed
[ 2559.373912] md/raid:md127: read error corrected (8 sectors at 1144397824 on sdc1)
[ 2559.373917] md/raid:md127: read error corrected (8 sectors at 1144397832 on sdc1)
[ 2559.373922] md/raid:md127: read error corrected (8 sectors at 1144397840 on sdc1)
[ 2559.373926] md/raid:md127: read error corrected (8 sectors at 1144397848 on sdc1)
[ 2559.373930] md/raid:md127: read error corrected (8 sectors at 1144397856 on sdc1)
[ 2559.373932] md/raid:md127: read error corrected (8 sectors at 1144397864 on sdc1)
[ 2559.373935] md/raid:md127: read error corrected (8 sectors at 1144397872 on sdc1)
[ 2559.373939] md/raid:md127: read error corrected (8 sectors at 1144397880 on sdc1)
[ 2559.373943] md/raid:md127: read error corrected (8 sectors at 1144397888 on sdc1)
[ 2559.373946] md/raid:md127: read error corrected (8 sectors at 1144397896 on sdc1)
[ 2589.792016] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 2589.792022] ata3.00: cmd 60/c8:00:77:22:36/01:00:44:00:00/40 tag 0 ncq 233472 in
[ 2589.792023] res 40/00:00:39:21:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 2589.792027] ata3: hard resetting link
[ 2590.097025] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2590.100506] ata3.00: configured for UDMA/133
[ 2590.111011] ata3: EH complete
[ 2620.760711] raid5_end_read_request: 21 callbacks suppressed
[ 2620.760715] md/raid:md127: read error corrected (8 sectors at 1144398072 on sdc1)
[ 2620.760719] md/raid:md127: read error corrected (8 sectors at 1144398080 on sdc1)
[ 2620.760722] md/raid:md127: read error corrected (8 sectors at 1144398088 on sdc1)
[ 2620.760725] md/raid:md127: read error corrected (8 sectors at 1144398096 on sdc1)
[ 2620.760727] md/raid:md127: read error corrected (8 sectors at 1144398104 on sdc1)
[ 2620.760731] md/raid:md127: read error corrected (8 sectors at 1144398112 on sdc1)
[ 2620.760733] md/raid:md127: read error corrected (8 sectors at 1144398120 on sdc1)
[ 2620.760736] md/raid:md127: read error corrected (8 sectors at 1144398128 on sdc1)
[ 2620.760738] md/raid:md127: read error corrected (8 sectors at 1144398136 on sdc1)
[ 2620.760742] md/raid:md127: read error corrected (8 sectors at 1144398144 on sdc1)
[ 2696.471158] ata3.00: exception Emask 0x0 SAct 0x110 SErr 0x0 action 0x0
[ 2696.471160] ata3.00: irq_stat 0x40000008
[ 2696.471165] ata3.00: cmd 60/f8:20:27:3d:36/00:00:44:00:00/40 tag 4 ncq 126976 in
[ 2696.471166] res 41/40:00:2b:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2696.475467] ata3.00: configured for UDMA/133
[ 2696.475475] ata3: EH complete
[ 2713.607515] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2713.607517] ata3.00: irq_stat 0x40000008
[ 2713.607522] ata3.00: cmd 60/f8:08:27:3d:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2713.607523] res 41/40:00:53:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2713.611190] ata3.00: configured for UDMA/133
[ 2713.611195] ata3: EH complete
[ 2716.615356] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2716.615358] ata3.00: irq_stat 0x40000008
[ 2716.615363] ata3.00: cmd 60/f8:00:27:3d:36/00:00:44:00:00/40 tag 0 ncq 126976 in
[ 2716.615364] res 41/40:00:28:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2716.619283] ata3.00: configured for UDMA/133
[ 2716.619290] ata3: EH complete
[ 2719.756321] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2719.756324] ata3.00: irq_stat 0x40000008
[ 2719.756329] ata3.00: cmd 60/f8:08:27:3d:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2719.756330] res 41/40:00:28:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2719.760930] ata3.00: configured for UDMA/133
[ 2719.760937] ata3: EH complete
[ 2723.119127] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2723.119129] ata3.00: irq_stat 0x40000008
[ 2723.119134] ata3.00: cmd 60/f8:00:27:3d:36/00:00:44:00:00/40 tag 0 ncq 126976 in
[ 2723.119135] res 41/40:00:28:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2723.122802] ata3.00: configured for UDMA/133
[ 2723.122810] ata3: EH complete
[ 2727.492027] ata3.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[ 2727.492030] ata3.00: irq_stat 0x40000008
[ 2727.492035] ata3.00: cmd 60/f8:08:27:3d:36/00:00:44:00:00/40 tag 1 ncq 126976 in
[ 2727.492036] res 41/40:00:2a:3d:36/00:00:44:00:00/40 Emask 0x409 (media error)
[ 2727.495703] ata3.00: configured for UDMA/133
[ 2727.495719] sd 2:0:0:0: [sdc] Unhandled sense code
[ 2727.495720] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
[ 2727.495723] sd 2:0:0:0: [sdc] Sense Key : 0x3 [current] [descriptor]
[ 2727.495726] Descriptor sense data with sense descriptors (in hex):
[ 2727.495727] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2727.495732] 44 36 3d 2a
[ 2727.495734] sd 2:0:0:0: [sdc] ASC=0x11 ASCQ=0x4
[ 2727.495736] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 44 36 3d 27 00 00 f8 00
[ 2727.495740] end_request: I/O error, dev sdc, sector 1144405290
[ 2727.495753] ata3: EH complete
[ 2729.285538] raid5_end_read_request: 30 callbacks suppressed
[ 2729.285541] md/raid:md127: read error corrected (8 sectors at 1144405224 on sdc1)
[ 2729.286038] md/raid:md127: read error corrected (8 sectors at 1144405232 on sdc1)
[ 2729.286041] md/raid:md127: read error corrected (8 sectors at 1144405240 on sdc1)
[ 2729.286043] md/raid:md127: read error corrected (8 sectors at 1144405248 on sdc1)
[ 2729.286045] md/raid:md127: read error corrected (8 sectors at 1144405256 on sdc1)
[ 2729.286046] md/raid:md127: read error corrected (8 sectors at 1144405264 on sdc1)
[ 2729.286048] md/raid:md127: read error corrected (8 sectors at 1144405272 on sdc1)
[ 2729.286050] md/raid:md127: read error corrected (8 sectors at 1144405280 on sdc1)
[ 2729.286051] md/raid:md127: read error corrected (8 sectors at 1144405288 on sdc1)
[ 2729.286053] md/raid:md127: read error corrected (8 sectors at 1144405296 on sdc1)
[ 5487.223246] sd 2:0:0:0: [sdc] Unhandled error code
[ 5487.223254] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5487.223263] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 96 a8 47 00 00 f8 00
[ 5487.223281] end_request: I/O error, dev sdc, sector 127313991
[ 5500.076516] raid5_end_read_request: 21 callbacks suppressed
[ 5500.076528] md/raid:md127: read error corrected (8 sectors at 127313928 on sdc1)
[ 5500.076537] md/raid:md127: read error corrected (8 sectors at 127313936 on sdc1)
[ 5500.076545] md/raid:md127: read error corrected (8 sectors at 127313944 on sdc1)
[ 5500.076553] md/raid:md127: read error corrected (8 sectors at 127313952 on sdc1)
[ 5500.076559] md/raid:md127: read error corrected (8 sectors at 127313960 on sdc1)
[ 5500.076568] md/raid:md127: read error corrected (8 sectors at 127313968 on sdc1)
[ 5500.076575] md/raid:md127: read error corrected (8 sectors at 127313976 on sdc1)
[ 5500.076581] md/raid:md127: read error corrected (8 sectors at 127313984 on sdc1)
[ 5500.076587] md/raid:md127: read error corrected (8 sectors at 127313992 on sdc1)
[ 5500.076594] md/raid:md127: read error corrected (8 sectors at 127314000 on sdc1)
[ 5760.329416] sd 2:0:0:0: [sdc] Unhandled error code
[ 5760.329424] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5760.329432] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 97 c4 47 00 00 f8 00
[ 5760.329451] end_request: I/O error, dev sdc, sector 127386695
[ 5760.329504] sd 2:0:0:0: [sdc] Unhandled error code
[ 5760.329509] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5760.329516] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 97 c5 3f 00 00 08 00
[ 5760.329533] end_request: I/O error, dev sdc, sector 127386943
[ 5760.329549] sd 2:0:0:0: [sdc] Unhandled error code
[ 5760.329554] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5760.329560] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 97 c5 47 00 00 f8 00
[ 5760.329575] end_request: I/O error, dev sdc, sector 127386951
[ 5784.468037] raid5_end_read_request: 21 callbacks suppressed
[ 5784.468047] md/raid:md127: read error corrected (8 sectors at 127386632 on sdc1)
[ 5784.468057] md/raid:md127: read error corrected (8 sectors at 127386640 on sdc1)
[ 5784.468065] md/raid:md127: read error corrected (8 sectors at 127386648 on sdc1)
[ 5784.468071] md/raid:md127: read error corrected (8 sectors at 127386656 on sdc1)
[ 5784.468079] md/raid:md127: read error corrected (8 sectors at 127386664 on sdc1)
[ 5784.468086] md/raid:md127: read error corrected (8 sectors at 127386672 on sdc1)
[ 5784.468093] md/raid:md127: read error corrected (8 sectors at 127386680 on sdc1)
[ 5784.468100] md/raid:md127: read error corrected (8 sectors at 127386688 on sdc1)
[ 5784.468106] md/raid:md127: read error corrected (8 sectors at 127386696 on sdc1)
[ 5784.468113] md/raid:md127: read error corrected (8 sectors at 127386704 on sdc1)
[ 5878.726318] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726327] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726335] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 12 47 00 00 f8 00
[ 5878.726353] end_request: I/O error, dev sdc, sector 127406663
[ 5878.726408] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726413] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726420] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 13 3f 00 00 08 00
[ 5878.726435] end_request: I/O error, dev sdc, sector 127406911
[ 5878.726450] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726454] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726460] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 13 47 00 00 e0 00
[ 5878.726475] end_request: I/O error, dev sdc, sector 127406919
[ 5878.726510] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726514] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726520] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 14 27 00 00 18 00
[ 5878.726534] end_request: I/O error, dev sdc, sector 127407143
[ 5878.726546] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726550] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726556] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 14 3f 00 00 08 00
[ 5878.726570] end_request: I/O error, dev sdc, sector 127407167
[ 5878.726584] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726588] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726594] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 14 47 00 00 f8 00
[ 5878.726609] end_request: I/O error, dev sdc, sector 127407175
[ 5878.726646] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726651] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726657] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 15 3f 00 00 40 00
[ 5878.726671] end_request: I/O error, dev sdc, sector 127407423
[ 5878.726688] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726692] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726698] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 15 7f 00 00 10 00
[ 5878.726712] end_request: I/O error, dev sdc, sector 127407487
[ 5878.726725] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726730] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726736] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 15 8f 00 00 b0 00
[ 5878.726750] end_request: I/O error, dev sdc, sector 127407503
[ 5878.726779] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726783] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726789] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 16 3f 00 00 08 00
[ 5878.726803] end_request: I/O error, dev sdc, sector 127407679
[ 5878.726814] sd 2:0:0:0: [sdc] Unhandled error code
[ 5878.726818] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 5878.726824] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 98 16 47 00 00 58 00
[ 5878.726839] end_request: I/O error, dev sdc, sector 127407687
[ 5895.242037] raid5_end_read_request: 53 callbacks suppressed
[ 5895.242048] md/raid:md127: read error corrected (8 sectors at 127407624 on sdc1)
[ 5895.242062] md/raid:md127: read error corrected (8 sectors at 127407632 on sdc1)
[ 5895.242069] md/raid:md127: read error corrected (8 sectors at 127407640 on sdc1)
[ 5895.242076] md/raid:md127: read error corrected (8 sectors at 127407648 on sdc1)
[ 5895.242082] md/raid:md127: read error corrected (8 sectors at 127407656 on sdc1)
[ 5895.242089] md/raid:md127: read error corrected (8 sectors at 127407664 on sdc1)
[ 5895.242095] md/raid:md127: read error corrected (8 sectors at 127407672 on sdc1)
[ 5895.242102] md/raid:md127: read error corrected (8 sectors at 127407680 on sdc1)
[ 5895.242108] md/raid:md127: read error corrected (8 sectors at 127407688 on sdc1)
[ 5895.242115] md/raid:md127: read error corrected (8 sectors at 127407696 on sdc1)
[ 6239.712083] ata3.00: exception Emask 0x0 SAct 0xeff7 SErr 0x0 action 0x6 frozen
[ 6239.712103] ata3.00: cmd 60/e0:00:47:62:99/00:00:07:00:00/40 tag 0 ncq 114688 in
[ 6239.712106] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712121] ata3.00: cmd 60/e0:08:5f:61:99/00:00:07:00:00/40 tag 1 ncq 114688 in
[ 6239.712124] res 40/00:00:2a:3d:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6239.712138] ata3.00: cmd 60/08:10:3f:62:99/00:00:07:00:00/40 tag 2 ncq 4096 in
[ 6239.712141] res 40/00:00:39:21:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6239.712154] ata3.00: cmd 60/08:20:3f:60:99/00:00:07:00:00/40 tag 4 ncq 4096 in
[ 6239.712157] res 40/00:00:2b:3d:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6239.712170] ata3.00: cmd 60/f8:28:47:60:99/00:00:07:00:00/40 tag 5 ncq 126976 in
[ 6239.712173] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712186] ata3.00: cmd 60/18:30:27:63:99/00:00:07:00:00/40 tag 6 ncq 12288 in
[ 6239.712189] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712203] ata3.00: cmd 60/00:38:3f:63:99/01:00:07:00:00/40 tag 7 ncq 131072 in
[ 6239.712206] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712219] ata3.00: cmd 60/00:40:3f:64:99/01:00:07:00:00/40 tag 8 ncq 131072 in
[ 6239.712222] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712235] ata3.00: cmd 60/f8:48:47:65:99/00:00:07:00:00/40 tag 9 ncq 126976 in
[ 6239.712238] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712251] ata3.00: cmd 60/08:50:3f:66:99/00:00:07:00:00/40 tag 10 ncq 4096 in
[ 6239.712254] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712267] ata3.00: cmd 60/f8:58:47:66:99/00:00:07:00:00/40 tag 11 ncq 126976 in
[ 6239.712270] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712283] ata3.00: cmd 60/08:68:3f:65:99/00:00:07:00:00/40 tag 13 ncq 4096 in
[ 6239.712286] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712299] ata3.00: cmd 60/08:70:3f:67:99/00:00:07:00:00/40 tag 14 ncq 4096 in
[ 6239.712302] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712315] ata3.00: cmd 60/08:78:47:67:99/00:00:07:00:00/40 tag 15 ncq 4096 in
[ 6239.712318] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6239.712329] ata3: hard resetting link
[ 6240.017072] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6240.021419] ata3.00: configured for UDMA/133
[ 6240.032055] ata3.00: device reported invalid CHS sector 0
[ 6240.032068] ata3.00: device reported invalid CHS sector 0
[ 6240.032075] ata3.00: device reported invalid CHS sector 0
[ 6240.032081] ata3.00: device reported invalid CHS sector 0
[ 6240.032086] ata3.00: device reported invalid CHS sector 0
[ 6240.032092] ata3.00: device reported invalid CHS sector 0
[ 6240.032097] ata3.00: device reported invalid CHS sector 0
[ 6240.032103] ata3.00: device reported invalid CHS sector 0
[ 6240.032108] ata3.00: device reported invalid CHS sector 0
[ 6240.032113] ata3.00: device reported invalid CHS sector 0
[ 6240.032117] ata3.00: device reported invalid CHS sector 0
[ 6240.032137] sd 2:0:0:0: [sdc] Unhandled error code
[ 6240.032142] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6240.032149] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 5f 3f 00 01 00 00
[ 6240.032167] end_request: I/O error, dev sdc, sector 127491903
[ 6240.032255] ata3: EH complete
[ 6293.728070] ata3.00: exception Emask 0x0 SAct 0x2814 SErr 0x0 action 0x6 frozen
[ 6293.728091] ata3.00: cmd 60/00:10:4f:67:99/04:00:07:00:00/40 tag 2 ncq 524288 in
[ 6293.728094] res 40/00:00:39:21:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6293.728109] ata3.00: cmd 60/08:20:4f:6b:99/01:00:07:00:00/40 tag 4 ncq 135168 in
[ 6293.728112] res 40/00:00:2b:3d:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6293.728127] ata3.00: cmd 60/08:58:3f:62:99/00:00:07:00:00/40 tag 11 ncq 4096 in
[ 6293.728130] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6293.728143] ata3.00: cmd 60/e0:68:47:62:99/00:00:07:00:00/40 tag 13 ncq 114688 in
[ 6293.728146] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6293.728157] ata3: hard resetting link
[ 6294.033045] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6294.037549] ata3.00: configured for UDMA/133
[ 6294.048052] ata3.00: device reported invalid CHS sector 0
[ 6294.048060] ata3.00: device reported invalid CHS sector 0
[ 6294.048081] ata3: EH complete
[ 6324.704077] ata3.00: exception Emask 0x0 SAct 0xc SErr 0x0 action 0x6 frozen
[ 6324.704097] ata3.00: cmd 60/08:10:4f:6b:99/01:00:07:00:00/40 tag 2 ncq 135168 in
[ 6324.704100] res 40/00:00:39:21:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6324.704116] ata3.00: cmd 60/00:18:4f:67:99/04:00:07:00:00/40 tag 3 ncq 524288 in
[ 6324.704119] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6324.704131] ata3: hard resetting link
[ 6325.009059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6325.014250] ata3.00: configured for UDMA/133
[ 6325.025050] ata3.00: device reported invalid CHS sector 0
[ 6325.025069] ata3: EH complete
[ 6360.041231] raid5_end_read_request: 129 callbacks suppressed
[ 6360.041241] md/raid:md127: read error corrected (8 sectors at 127491840 on sdc1)
[ 6360.041251] md/raid:md127: read error corrected (8 sectors at 127491848 on sdc1)
[ 6360.041259] md/raid:md127: read error corrected (8 sectors at 127491856 on sdc1)
[ 6360.041266] md/raid:md127: read error corrected (8 sectors at 127491864 on sdc1)
[ 6360.041272] md/raid:md127: read error corrected (8 sectors at 127491872 on sdc1)
[ 6360.041279] md/raid:md127: read error corrected (8 sectors at 127491880 on sdc1)
[ 6360.041285] md/raid:md127: read error corrected (8 sectors at 127491888 on sdc1)
[ 6360.041291] md/raid:md127: read error corrected (8 sectors at 127491896 on sdc1)
[ 6360.041297] md/raid:md127: read error corrected (8 sectors at 127491904 on sdc1)
[ 6360.041304] md/raid:md127: read error corrected (8 sectors at 127491912 on sdc1)
[ 6418.720054] ata3.00: NCQ disabled due to excessive errors
[ 6418.720066] ata3.00: exception Emask 0x0 SAct 0xf801d SErr 0x0 action 0x6 frozen
[ 6418.720084] ata3.00: cmd 60/e8:00:57:87:99/00:00:07:00:00/40 tag 0 ncq 118784 in
[ 6418.720087] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720102] ata3.00: cmd 60/08:10:3f:88:99/00:00:07:00:00/40 tag 2 ncq 4096 in
[ 6418.720105] res 40/00:00:39:21:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6418.720118] ata3.00: cmd 60/f8:18:47:88:99/00:00:07:00:00/40 tag 3 ncq 126976 in
[ 6418.720121] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720135] ata3.00: cmd 60/30:20:3f:89:99/00:00:07:00:00/40 tag 4 ncq 24576 in
[ 6418.720138] res 40/00:00:2b:3d:36/00:00:44:00:00/40 Emask 0x4 (timeout)
[ 6418.720152] ata3.00: cmd 60/d0:78:6f:85:99/00:00:07:00:00/40 tag 15 ncq 106496 in
[ 6418.720155] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720168] ata3.00: cmd 60/18:80:3f:86:99/00:00:07:00:00/40 tag 16 ncq 12288 in
[ 6418.720171] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720184] ata3.00: cmd 60/e8:88:57:86:99/00:00:07:00:00/40 tag 17 ncq 118784 in
[ 6418.720187] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720200] ata3.00: cmd 60/08:90:3f:87:99/00:00:07:00:00/40 tag 18 ncq 4096 in
[ 6418.720203] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720216] ata3.00: cmd 60/10:98:47:87:99/00:00:07:00:00/40 tag 19 ncq 8192 in
[ 6418.720219] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 6418.720229] ata3: hard resetting link
[ 6419.025072] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6419.028616] ata3.00: configured for UDMA/133
[ 6419.039061] ata3.00: device reported invalid CHS sector 0
[ 6419.039072] ata3.00: device reported invalid CHS sector 0
[ 6419.039080] ata3.00: device reported invalid CHS sector 0
[ 6419.039085] ata3.00: device reported invalid CHS sector 0
[ 6419.039091] ata3.00: device reported invalid CHS sector 0
[ 6419.039096] ata3.00: device reported invalid CHS sector 0
[ 6419.039101] ata3.00: device reported invalid CHS sector 0
[ 6419.039119] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039124] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039131] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 82 5f 00 00 e0 00
[ 6419.039149] end_request: I/O error, dev sdc, sector 127500895
[ 6419.039214] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039219] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039227] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 83 3f 00 00 10 00
[ 6419.039243] end_request: I/O error, dev sdc, sector 127501119
[ 6419.039256] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039260] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039266] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 83 4f 00 00 08 00
[ 6419.039281] end_request: I/O error, dev sdc, sector 127501135
[ 6419.039297] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039301] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039308] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 84 57 00 00 e8 00
[ 6419.039324] end_request: I/O error, dev sdc, sector 127501399
[ 6419.039377] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039382] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039389] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 85 3f 00 00 10 00
[ 6419.039405] end_request: I/O error, dev sdc, sector 127501631
[ 6419.039420] sd 2:0:0:0: [sdc] Unhandled error code
[ 6419.039425] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x06
[ 6419.039433] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 99 85 4f 00 00 20 00
[ 6419.039449] end_request: I/O error, dev sdc, sector 127501647
[ 6419.039481] ata3: EH complete
[ 6498.909349] raid5_end_read_request: 22 callbacks suppressed
[ 6498.909361] md/raid:md127: read error corrected (8 sectors at 127500832 on sdc1)
[ 6498.909373] md/raid:md127: read error corrected (8 sectors at 127500840 on sdc1)
[ 6498.909383] md/raid:md127: read error corrected (8 sectors at 127500848 on sdc1)
[ 6498.909391] md/raid:md127: read error corrected (8 sectors at 127500856 on sdc1)
[ 6498.909399] md/raid:md127: read error corrected (8 sectors at 127500864 on sdc1)
[ 6498.909407] md/raid:md127: read error corrected (8 sectors at 127500872 on sdc1)
[ 6498.909416] md/raid:md127: read error corrected (8 sectors at 127500880 on sdc1)
[ 6498.909427] md/raid:md127: read error corrected (8 sectors at 127500888 on sdc1)
[ 6498.909435] md/raid:md127: read error corrected (8 sectors at 127500896 on sdc1)
[ 6498.909444] md/raid:md127: read error corrected (8 sectors at 127500904 on sdc1)
[ 6994.136428] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6994.136438] ata3.00: irq_stat 0x40000001
[ 6994.136456] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 6994.136461] res 51/40:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x9 (media error)
[ 6995.901178] ata3.00: configured for UDMA/133
[ 6995.901205] ata3: EH complete
[ 7026.784079] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7026.784101] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7026.784106] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7026.784121] ata3: hard resetting link
[ 7027.089058] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7027.092659] ata3.00: configured for UDMA/133
[ 7027.103058] ata3: EH complete
[ 7057.760026] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7057.760033] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7057.760035] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7057.760039] ata3: hard resetting link
[ 7058.065071] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7058.069216] ata3.00: configured for UDMA/133
[ 7058.080061] ata3: EH complete
[ 7088.736071] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7088.736093] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7088.736098] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7088.736112] ata3: hard resetting link
[ 7089.041062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7089.044836] ata3.00: configured for UDMA/133
[ 7089.055065] ata3: EH complete
[ 7119.712092] ata3: limiting SATA link speed to 1.5 Gbps
[ 7119.712109] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7119.712128] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7119.712133] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7119.712147] ata3: hard resetting link
[ 7120.017047] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7120.021525] ata3.00: configured for UDMA/133
[ 7120.032056] ata3: EH complete
[ 7150.752049] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7150.752071] ata3.00: cmd 25/00:a0:3f:d0:a9/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7150.752076] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7150.752091] ata3: hard resetting link
[ 7151.057071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7151.061278] ata3.00: configured for UDMA/133
[ 7151.072079] sd 2:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08
[ 7151.072091] sd 2:0:0:0: [sdc] Sense Key : 0xb [current] [descriptor]
[ 7151.072103] Descriptor sense data with sense descriptors (in hex):
[ 7151.072108] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 7151.072128] 07 a9 d2 d2
[ 7151.072136] sd 2:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 7151.072145] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 07 a9 d0 3f 00 03 a0 00
[ 7151.072163] end_request: I/O error, dev sdc, sector 128569407
[ 7151.072360] ata3: EH complete
[ 7211.744059] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7211.744081] ata3.00: cmd 25/00:00:3f:d8:a9/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7211.744086] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7211.744100] ata3: hard resetting link
[ 7212.610074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7212.613641] ata3.00: configured for UDMA/133
[ 7212.624059] ata3: EH complete
[ 7242.720052] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7242.720073] ata3.00: cmd 25/00:00:3f:d8:a9/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7242.720078] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7242.720092] ata3: hard resetting link
[ 7243.025071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7243.028648] ata3.00: configured for UDMA/133
[ 7243.039069] ata3: EH complete
[ 7273.760067] ata3.00: limiting speed to UDMA/100:PIO4
[ 7273.760079] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7273.760098] ata3.00: cmd 25/00:00:3f:d8:a9/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7273.760103] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7273.760117] ata3: hard resetting link
[ 7274.065070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7274.068873] ata3.00: configured for UDMA/100
[ 7274.079066] ata3: EH complete
[ 7292.400959] raid5_end_read_request: 56 callbacks suppressed
[ 7292.400970] md/raid:md127: read error corrected (8 sectors at 128569344 on sdc1)
[ 7292.404363] md/raid:md127: read error corrected (8 sectors at 128569352 on sdc1)
[ 7292.404380] md/raid:md127: read error corrected (8 sectors at 128569360 on sdc1)
[ 7292.404392] md/raid:md127: read error corrected (8 sectors at 128569368 on sdc1)
[ 7292.404410] md/raid:md127: read error corrected (8 sectors at 128569376 on sdc1)
[ 7292.404418] md/raid:md127: read error corrected (8 sectors at 128569384 on sdc1)
[ 7292.404427] md/raid:md127: read error corrected (8 sectors at 128569392 on sdc1)
[ 7292.404435] md/raid:md127: read error corrected (8 sectors at 128569400 on sdc1)
[ 7292.404443] md/raid:md127: read error corrected (8 sectors at 128569408 on sdc1)
[ 7292.404451] md/raid:md127: read error corrected (8 sectors at 128569416 on sdc1)
[ 7439.712033] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7439.712040] ata3.00: cmd 25/00:00:df:0a:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7439.712041] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7439.712046] ata3: hard resetting link
[ 7440.018035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7440.021579] ata3.00: configured for UDMA/100
[ 7440.032065] ata3: EH complete
[ 7508.768068] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7508.768092] ata3.00: cmd 25/00:a0:3f:17:aa/00:03:07:00:00/e0 tag 0 dma 475136 in
[ 7508.768097] res 40/00:ff:d2:d2:a9/00:00:07:00:00/e0 Emask 0x4 (timeout)
[ 7508.768112] ata3: hard resetting link
[ 7509.073036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7509.077290] ata3.00: configured for UDMA/100
[ 7509.088056] ata3: EH complete
[ 7679.192904] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7679.192914] ata3.00: irq_stat 0x40000001
[ 7679.192931] ata3.00: cmd 25/00:68:3f:bc:44/00:00:44:00:00/e0 tag 0 dma 53248 in
[ 7679.192936] res 51/40:57:41:bc:44/00:00:44:00:00/e0 Emask 0x9 (media error)
[ 7680.957569] ata3.00: configured for UDMA/100
[ 7680.957591] ata3: EH complete
[ 7683.443433] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7683.443442] ata3.00: irq_stat 0x40000001
[ 7683.443459] ata3.00: cmd 25/00:68:3f:bc:44/00:00:44:00:00/e0 tag 0 dma 53248 in
[ 7683.443464] res 51/40:57:3f:bc:44/00:00:44:00:00/e0 Emask 0x9 (media error)
[ 7684.065237] ata3.00: configured for UDMA/100
[ 7684.065260] ata3: EH complete
[ 7691.867486] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7691.867495] ata3.00: irq_stat 0x40000001
[ 7691.867511] ata3.00: cmd 25/00:68:3f:bc:44/00:00:44:00:00/e0 tag 0 dma 53248 in
[ 7691.867516] res 51/40:57:46:bc:44/00:00:44:00:00/e0 Emask 0x9 (media error)
[ 7693.632179] ata3.00: configured for UDMA/100
[ 7693.632203] ata3: EH complete
[ 7808.696092] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7808.696113] ata3.00: cmd 25/00:00:df:8e:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7808.696119] res 40/00:57:46:bc:44/00:00:44:00:00/e0 Emask 0x4 (timeout)
[ 7808.696133] ata3: hard resetting link
[ 7809.001065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7809.005651] ata3.00: configured for UDMA/100
[ 7809.016052] ata3: EH complete
[ 7839.712069] ata3.00: limiting speed to UDMA/33:PIO4
[ 7839.712081] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7839.712100] ata3.00: cmd 25/00:00:df:8e:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7839.712104] res 40/00:57:46:bc:44/00:00:44:00:00/e0 Emask 0x4 (timeout)
[ 7839.712119] ata3: hard resetting link
[ 7840.017080] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7840.020685] ata3.00: configured for UDMA/33
[ 7840.031069] ata3: EH complete
[ 7870.816073] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7870.816094] ata3.00: cmd 25/00:00:df:8e:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7870.816099] res 40/00:57:46:bc:44/00:00:44:00:00/e0 Emask 0x4 (timeout)
[ 7870.816113] ata3: hard resetting link
[ 7871.121060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7871.124871] ata3.00: configured for UDMA/33
[ 7871.135073] ata3: EH complete
[ 7974.752146] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7974.752167] ata3.00: cmd 25/00:00:c7:a2:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 7974.752172] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7974.752187] ata3: hard resetting link
[ 7975.057065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7975.060652] ata3.00: configured for UDMA/33
[ 7975.071050] ata3.00: device reported invalid CHS sector 0
[ 7975.071069] ata3: EH complete
[ 8005.728070] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8005.728091] ata3.00: cmd 25/00:00:c7:a2:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8005.728096] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8005.728111] ata3: hard resetting link
[ 8006.033066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8006.037217] ata3.00: configured for UDMA/33
[ 8006.048057] ata3.00: device reported invalid CHS sector 0
[ 8006.048076] ata3: EH complete
[ 8036.704139] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8036.704160] ata3.00: cmd 25/00:00:c7:a2:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8036.704165] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8036.704179] ata3: hard resetting link
[ 8037.009077] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8037.012831] ata3.00: configured for UDMA/33
[ 8037.023047] ata3.00: device reported invalid CHS sector 0
[ 8037.023066] ata3: EH complete
[ 8067.808048] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8067.808069] ata3.00: cmd 25/00:00:c7:a2:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8067.808074] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8067.808089] ata3: hard resetting link
[ 8068.113060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8068.116599] ata3.00: configured for UDMA/33
[ 8068.127045] ata3.00: device reported invalid CHS sector 0
[ 8068.127123] ata3: EH complete
[ 8078.848360] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8078.848370] ata3.00: irq_stat 0x40000001
[ 8078.848387] ata3.00: cmd 25/00:00:c7:a2:aa/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8078.848392] res 51/40:cf:f3:a2:aa/00:03:07:00:00/e0 Emask 0x9 (media error)
[ 8080.613063] ata3.00: configured for UDMA/33
[ 8080.613088] ata3: EH complete
[ 8186.720068] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8186.720089] ata3.00: cmd 25/00:68:3f:bf:aa/00:03:07:00:00/e0 tag 0 dma 446464 in
[ 8186.720094] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8186.720108] ata3: hard resetting link
[ 8187.025071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8187.029519] ata3.00: configured for UDMA/33
[ 8187.040057] ata3.00: device reported invalid CHS sector 0
[ 8187.040076] ata3: EH complete
[ 8217.760064] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8217.760085] ata3.00: cmd 25/00:68:3f:bf:aa/00:03:07:00:00/e0 tag 0 dma 446464 in
[ 8217.760090] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8217.760105] ata3: hard resetting link
[ 8218.065085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8218.068618] ata3.00: configured for UDMA/33
[ 8218.079079] ata3.00: device reported invalid CHS sector 0
[ 8218.079097] ata3: EH complete
[ 8469.728038] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8469.728045] ata3.00: cmd 25/00:00:0f:06:ac/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8469.728046] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8469.728051] ata3: hard resetting link
[ 8470.033046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8470.036716] ata3.00: configured for UDMA/33
[ 8470.047062] ata3.00: device reported invalid CHS sector 0
[ 8470.047081] ata3: EH complete
[ 8500.704139] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8500.704160] ata3.00: cmd 25/00:00:0f:06:ac/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8500.704165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8500.704179] ata3: hard resetting link
[ 8501.009069] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8501.013371] ata3.00: configured for UDMA/33
[ 8501.024049] ata3.00: device reported invalid CHS sector 0
[ 8501.024068] ata3: EH complete
[ 8543.712056] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8543.712076] ata3.00: cmd 25/00:00:0f:0a:ac/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8543.712081] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8543.712096] ata3: hard resetting link
[ 8544.017062] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8544.021514] ata3.00: configured for UDMA/33
[ 8544.032051] ata3.00: device reported invalid CHS sector 0
[ 8544.032070] ata3: EH complete
[ 8574.752068] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8574.752089] ata3.00: cmd 25/00:00:0f:0a:ac/00:04:07:00:00/e0 tag 0 dma 524288 in
[ 8574.752094] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8574.752109] ata3: hard resetting link
[ 8575.057072] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8575.060657] ata3.00: configured for UDMA/33
[ 8575.071056] ata3.00: device reported invalid CHS sector 0
[ 8575.071074] ata3: EH complete
[17063.712088] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[17063.712109] ata3.00: cmd 25/00:b8:87:81:c7/00:02:43:00:00/e0 tag 0 dma 356352 in
[17063.712114] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[17063.712129] ata3: hard resetting link
[17064.017074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[17064.020648] ata3.00: configured for UDMA/33
[17064.031045] ata3.00: device reported invalid CHS sector 0
[17064.031065] ata3: EH complete
[17519.712056] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[17519.712077] ata3.00: cmd 25/00:a0:3f:80:62/00:03:41:00:00/e0 tag 0 dma 475136 in
[17519.712082] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[17519.712097] ata3: hard resetting link
[17520.017070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[17520.021095] ata3.00: configured for UDMA/33
[17520.032040] ata3.00: device reported invalid CHS sector 0
[17520.032058] ata3: EH complete
[17599.638635] md: cannot remove active disk sdc1 from md127 …
[17632.431029] md/raid:md127: Disk failure on sdc1, disabling device.
[17632.431034] md/raid:md127: Operation continuing on 4 devices.
[17633.194086] md: md127: resync done.
[17633.211165] md: checkpointing resync of md127.
[17633.236560] RAID conf printout:
[17633.236568] — level:5 rd:5 wd:4
[17633.236575] disk 0, o:1, dev:sde1
[17633.236581] disk 1, o:1, dev:sdd1
[17633.236586] disk 2, o:1, dev:sdb1
[17633.236591] disk 3, o:1, dev:sdf1
[17633.236596] disk 4, o:0, dev:sdc1
[17633.241036] RAID conf printout:
[17633.241043] — level:5 rd:5 wd:4
[17633.241050] disk 0, o:1, dev:sde1
[17633.241055] disk 1, o:1, dev:sdd1
[17633.241059] disk 2, o:1, dev:sdb1
[17633.241064] disk 3, o:1, dev:sdf1
[17633.241149] md: resync of RAID array md127
[17633.241157] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[17633.241164] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[17633.241177] md: using 128k window, over a total of 976758784 blocks.
[17633.241183] md: resuming resync of md127 from checkpoint.
[17633.241188] md: md127: resync done.
[17633.247696] RAID conf printout:
[17633.247704] — level:5 rd:5 wd:4
[17633.247710] disk 0, o:1, dev:sde1
[17633.247716] disk 1, o:1, dev:sdd1
[17633.247720] disk 2, o:1, dev:sdb1
[17633.247725] disk 3, o:1, dev:sdf1
[17633.434797] md: unbind
[17633.441061] md: export_rdev(sdc1)
[18165.704051] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[18165.704072] ata3.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[18165.704077] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[18165.704092] ata3: hard resetting link
[18166.009073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[18166.050661] ata3.00: configured for UDMA/33
[18166.061089] ata3: EH complete
[20330.135529] IR NEC protocol handler initialized
[20330.140386] IR RC5(x) protocol handler initialized
[20330.141912] bttv: driver version 0.9.18 loaded
[20330.141914] bttv: using 8 buffers with 2080k (520 pages) each for capture
[20330.141955] bttv: Bt8xx card found (0).
[20330.141967] bttv 0000:07:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[20330.141977] bttv0: Bt878 (rev 17) at 0000:07:06.0, irq: 20, latency: 32, mmio: 0xfd5ff000
[20330.142679] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[20330.142682] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[20330.142711] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[20330.143613] IR RC6 protocol handler initialized
[20330.145219] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[20330.147198] IR JVC protocol handler initialized
[20330.150534] IR Sony protocol handler initialized
[20330.154582] lirc_dev: IR Remote Control driver registered, major 244
[20330.155216] IR LIRC bridge handler initialized
[20330.182861] tveeprom 3-0050: Hauppauge model 38074, rev B421, serial# 3794606
[20330.182864] tveeprom 3-0050: tuner model is Philips FM1216 (idx 21, type 5)
[20330.182866] tveeprom 3-0050: TV standards PAL(B/G) (eeprom 0x04)
[20330.182868] tveeprom 3-0050: audio processor is None (idx 0)
[20330.182870] tveeprom 3-0050: has radio
[20330.182871] bttv0: Hauppauge eeprom indicates model#38074
[20330.182873] bttv0: tuner type=5
[20330.192432] bttv0: audio absent, no audio device found!
[20330.193865] i2c-core: driver [tuner] using legacy suspend method
[20330.193867] i2c-core: driver [tuner] using legacy resume method
[20330.198487] tuner 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
[20330.198806] tuner-simple 3-0061: creating new instance
[20330.198809] tuner-simple 3-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[20330.199611] bttv0: registered device video0
[20330.199627] bttv0: registered device vbi0
[20330.199646] bttv0: registered device radio0
[20330.199673] bttv0: PLL: 28636363 => 35468950 .
[20330.200461] bttv0: PLL: 28636363 => 35468950 .
[20330.201555] bttv0: PLL: 28636363 => 35468950 .. ok
[20330.212054] ok
[20330.221050] ok
[33078.709661] <30>udevd[24873]: starting version 168
[47566.752055] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[47566.752061] ata3.00: cmd 35/00:80:00:a0:16/00:00:44:00:00/e0 tag 0 dma 65536 out
[47566.752063] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[47566.752067] ata3: hard resetting link
[47572.106056] ata3: link is slow to respond, please be patient (ready=0)
[47576.799044] ata3: COMRESET failed (errno=-16)
[47576.799057] ata3: hard resetting link
[47582.153025] ata3: link is slow to respond, please be patient (ready=0)
[47586.845043] ata3: COMRESET failed (errno=-16)
[47586.845056] ata3: hard resetting link
[47592.199052] ata3: link is slow to respond, please be patient (ready=0)
[47621.784070] ata3: SATA link down (SStatus 0 SControl 310)
[47621.825130] ata3: hard resetting link
[47627.179055] ata3: link is slow to respond, please be patient (ready=0)
[47627.893058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[47627.930360] ata3.00: configured for UDMA/33
[47627.941053] ata3.00: device reported invalid CHS sector 0
[47627.941071] ata3: EH complete
[47658.720065] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[47658.720086] ata3.00: cmd 35/00:80:00:bf:16/00:00:44:00:00/e0 tag 0 dma 65536 out
[47658.720091] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[47658.720105] ata3: hard resetting link
[47664.074027] ata3: link is slow to respond, please be patient (ready=0)
[47668.766054] ata3: COMRESET failed (errno=-16)
[47668.766067] ata3: hard resetting link
[47674.120062] ata3: link is slow to respond, please be patient (ready=0)
[47678.812028] ata3: COMRESET failed (errno=-16)
[47678.812035] ata3: hard resetting link
[47684.168057] ata3: link is slow to respond, please be patient (ready=0)
[47713.748061] ata3: SATA link down (SStatus 0 SControl 310)
[47713.792886] ata3: hard resetting link
[47719.146064] ata3: link is slow to respond, please be patient (ready=0)
[47719.962069] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[47719.999825] ata3.00: configured for UDMA/33
[47720.010056] ata3.00: device reported invalid CHS sector 0
[47720.010073] ata3: EH complete
[47750.752081] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[47750.752101] ata3.00: cmd 35/00:80:00:e1:16/00:00:44:00:00/e0 tag 0 dma 65536 out
[47750.752106] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[47750.752121] ata3: hard resetting link
[47756.106038] ata3: link is slow to respond, please be patient (ready=0)
[47760.798054] ata3: COMRESET failed (errno=-16)
[47760.798066] ata3: hard resetting link
[47766.152051] ata3: link is slow to respond, please be patient (ready=0)
[47770.844054] ata3: COMRESET failed (errno=-16)
[47770.844066] ata3: hard resetting link
[47771.149077] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[47771.504165] ata3.00: configured for UDMA/33
[47771.515054] ata3.00: device reported invalid CHS sector 0
[47771.515072] ata3: EH complete
[54664.704070] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[54664.704090] ata3.00: cmd 35/00:80:80:da:b8/00:00:73:00:00/e0 tag 0 dma 65536 out
[54664.704096] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[54664.704110] ata3: hard resetting link
[54670.058054] ata3: link is slow to respond, please be patient (ready=0)
[54674.750053] ata3: COMRESET failed (errno=-16)
[54674.750065] ata3: hard resetting link
[54680.104053] ata3: link is slow to respond, please be patient (ready=0)
[54684.031074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[54684.053247] ata3.00: configured for UDMA/33
[54684.064055] ata3.00: device reported invalid CHS sector 0
[54684.064074] ata3: EH complete
[54714.720056] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[54714.720076] ata3.00: cmd 35/00:80:80:f9:b8/00:00:73:00:00/e0 tag 0 dma 65536 out
[54714.720081] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[54714.720096] ata3: hard resetting link
[54720.074061] ata3: link is slow to respond, please be patient (ready=0)
[54724.766057] ata3: COMRESET failed (errno=-16)
[54724.766071] ata3: hard resetting link
[54730.121039] ata3: link is slow to respond, please be patient (ready=0)
[54734.813055] ata3: COMRESET failed (errno=-16)
[54734.813068] ata3: hard resetting link
[54740.167040] ata3: link is slow to respond, please be patient (ready=0)
[54769.747066] ata3: SATA link down (SStatus 0 SControl 310)
[54769.793653] ata3: hard resetting link
[54775.147043] ata3: link is slow to respond, please be patient (ready=0)
[54776.116077] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[54776.149038] ata3.00: configured for UDMA/33
[54776.160044] ata3.00: device reported invalid CHS sector 0
[54776.160063] ata3: EH complete
[54860.768078] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[54860.768097] ata3.00: cmd 35/00:80:00:86:e6/00:00:73:00:00/e0 tag 0 dma 65536 out
[54860.768102] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[54860.768117] ata3: hard resetting link
[54866.122053] ata3: link is slow to respond, please be patient (ready=0)
[54870.814062] ata3: COMRESET failed (errno=-16)
[54870.814075] ata3: hard resetting link
[54871.680073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[54871.709725] ata3.00: configured for UDMA/33
[54871.720056] ata3.00: device reported invalid CHS sector 0
[54871.720073] ata3: EH complete
[54946.720137] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[54946.720157] ata3.00: cmd 35/00:80:80:79:fb/00:00:73:00:00/e0 tag 0 dma 65536 out
[54946.720162] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[54946.720177] ata3: hard resetting link
[54952.074057] ata3: link is slow to respond, please be patient (ready=0)
[54956.766048] ata3: COMRESET failed (errno=-16)
[54956.766061] ata3: hard resetting link
[54962.121055] ata3: link is slow to respond, please be patient (ready=0)
[54966.813053] ata3: COMRESET failed (errno=-16)
[54966.813065] ata3: hard resetting link
[54972.168050] ata3: link is slow to respond, please be patient (ready=0)
[54996.852066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[54996.867023] ata3.00: configured for UDMA/33
[54996.878047] ata3.00: device reported invalid CHS sector 0
[54996.878066] ata3: EH complete
[82040.868050] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[82040.868059] ata3.00: irq_stat 0x40000001
[82040.868076] ata3.00: cmd c8/00:80:80:ac:49/00:00:00:00:00/e7 tag 0 dma 65536 in
[82040.868081] res 51/40:0f:e4:ac:49/00:00:07:00:00/e7 Emask 0x9 (media error)
[82041.679897] ata3.00: configured for UDMA/33
[82041.679918] ata3: EH complete
[82547.644028] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[82547.644037] ata3.00: irq_stat 0x40000001
[82547.644054] ata3.00: cmd c8/00:80:00:b1:4a/00:00:00:00:00/e7 tag 0 dma 65536 in
[82547.644059] res 51/40:2f:46:b1:4a/00:00:07:00:00/e7 Emask 0x9 (media error)
[82548.859943] ata3.00: configured for UDMA/33
[82548.859966] ata3: EH complete
[85957.510882] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[85957.510891] ata3.00: irq_stat 0x40000001
[85957.510908] ata3.00: cmd c8/00:80:80:dd:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[85957.510913] res 51/40:3f:b8:dd:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[85959.282235] ata3.00: configured for UDMA/33
[85959.282257] ata3: EH complete
[86107.361580] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86107.361589] ata3.00: irq_stat 0x40000001
[86107.361606] ata3.00: cmd c8/00:80:00:ec:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86107.361611] res 51/40:5f:1a:ec:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86108.022697] ata3.00: configured for UDMA/33
[86108.022720] ata3: EH complete
[86116.884576] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86116.884585] ata3.00: irq_stat 0x40000001
[86116.884602] ata3.00: cmd c8/00:80:00:ec:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86116.884607] res 51/40:5f:16:ec:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86118.651256] ata3.00: configured for UDMA/33
[86118.651279] ata3: EH complete
[86185.760076] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[86185.760096] ata3.00: cmd c8/00:80:00:ed:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86185.760101] res 40/00:5f:16:ec:84/00:00:07:00:00/e7 Emask 0x4 (timeout)
[86185.760115] ata3: hard resetting link
[86186.320056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[86186.323907] ata3.00: configured for UDMA/33
[86186.334053] ata3: EH complete
[86218.085570] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86218.085579] ata3.00: irq_stat 0x40000001
[86218.085596] ata3.00: cmd c8/00:80:00:ee:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86218.085600] res 51/40:5f:18:ee:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86219.851303] ata3.00: configured for UDMA/33
[86219.851327] ata3: EH complete
[86228.495414] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86228.495423] ata3.00: irq_stat 0x40000001
[86228.495440] ata3.00: cmd c8/00:80:00:ee:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86228.495445] res 51/40:5f:1a:ee:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86229.154747] ata3.00: configured for UDMA/33
[86229.154770] ata3: EH complete
[86239.239273] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86239.239282] ata3.00: irq_stat 0x40000001
[86239.239298] ata3.00: cmd c8/00:80:00:ee:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86239.239303] res 51/40:5f:19:ee:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86241.005333] ata3.00: configured for UDMA/33
[86241.005354] ata3: EH complete
[86275.944295] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86275.944304] ata3.00: irq_stat 0x40000001
[86275.944320] ata3.00: cmd c8/00:80:00:ef:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86275.944325] res 51/40:5f:14:ef:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86276.601869] ata3.00: configured for UDMA/33
[86276.601891] ata3: EH complete
[86279.506929] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86279.506939] ata3.00: irq_stat 0x40000001
[86279.506955] ata3.00: cmd c8/00:80:00:ef:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86279.506961] res 51/40:6f:01:ef:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86281.273643] ata3.00: configured for UDMA/33
[86281.273666] ata3: EH complete
[86289.850804] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86289.850813] ata3.00: irq_stat 0x40000001
[86289.850830] ata3.00: cmd c8/00:80:00:ef:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86289.850835] res 51/40:5f:13:ef:84/00:00:07:00:00/e7 Emask 0x9 (media error)
[86290.508628] ata3.00: configured for UDMA/33
[86290.508650] ata3: EH complete
[86320.736055] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[86320.736075] ata3.00: cmd c8/00:80:00:ef:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86320.736080] res 40/00:5f:13:ef:84/00:00:07:00:00/e7 Emask 0x4 (timeout)
[86320.736095] ata3: hard resetting link
[86321.245066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[86321.248643] ata3.00: configured for UDMA/33
[86321.259053] ata3: EH complete
[86443.744069] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[86443.744089] ata3.00: cmd c8/00:80:80:f8:84/00:00:00:00:00/e7 tag 0 dma 65536 in
[86443.744095] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[86443.744109] ata3: hard resetting link
[86444.253060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[86444.256610] ata3.00: configured for UDMA/33
[86444.267051] ata3.00: device reported invalid CHS sector 0
[86444.267069] ata3: EH complete
[86560.622340] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86560.622349] ata3.00: irq_stat 0x40000001
[86560.622366] ata3.00: cmd c8/00:80:80:06:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86560.622370] res 51/40:3f:b9:06:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86562.391418] ata3.00: configured for UDMA/33
[86562.391437] ata3: EH complete
[86568.235550] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86568.235560] ata3.00: irq_stat 0x40000001
[86568.235576] ata3.00: cmd c8/00:80:80:06:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86568.235581] res 51/40:4f:a1:06:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86568.875209] ata3.00: configured for UDMA/33
[86568.875232] ata3: EH complete
[86629.260905] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86629.260907] ata3.00: irq_stat 0x40000001
[86629.260912] ata3.00: cmd c8/00:80:80:09:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86629.260913] res 51/40:1f:d4:09:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86631.026593] ata3.00: configured for UDMA/33
[86631.026615] ata3: EH complete
[86645.265190] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86645.265200] ata3.00: irq_stat 0x40000001
[86645.265216] ata3.00: cmd c8/00:80:80:09:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86645.265221] res 51/40:2f:c5:09:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86645.923413] ata3.00: configured for UDMA/33
[86645.923435] ata3: EH complete
[86648.960780] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86648.960789] ata3.00: irq_stat 0x40000001
[86648.960806] ata3.00: cmd c8/00:80:80:09:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86648.960811] res 51/40:6f:81:09:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86650.726459] ata3.00: configured for UDMA/33
[86650.726481] ata3: EH complete
[86655.276073] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[86655.276082] ata3.00: irq_stat 0x40000001
[86655.276099] ata3.00: cmd c8/00:80:80:09:85/00:00:00:00:00/e7 tag 0 dma 65536 in
[86655.276104] res 51/40:6f:8a:09:85/00:00:07:00:00/e7 Emask 0x9 (media error)
[86655.934505] ata3.00: configured for UDMA/33
[86655.934524] ata3: EH complete
[88717.517965] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[88717.517974] ata3.00: irq_stat 0x40000001
[88717.517991] ata3.00: cmd c8/00:80:80:4b:87/00:00:00:00:00/e7 tag 0 dma 65536 in
[88717.517995] res 51/40:0f:e9:4b:87/00:00:07:00:00/e7 Emask 0x9 (media error)
[88718.388679] ata3.00: configured for UDMA/33
[88718.388701] ata3: EH complete
[90132.262062] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90132.262071] ata3.00: irq_stat 0x40000001
[90132.262088] ata3.00: cmd c8/00:80:80:a2:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90132.262093] res 51/40:1f:d5:a2:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90133.286993] ata3.00: configured for UDMA/33
[90133.287042] ata3: EH complete
[90142.361938] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90142.361948] ata3.00: irq_stat 0x40000001
[90142.361964] ata3.00: cmd c8/00:80:80:a2:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90142.361969] res 51/40:2f:c8:a2:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90144.129130] ata3.00: configured for UDMA/33
[90144.129153] ata3: EH complete
[90419.566743] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90419.566752] ata3.00: irq_stat 0x40000001
[90419.566768] ata3.00: cmd c8/00:80:80:c0:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90419.566773] res 51/40:2f:cc:c0:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90421.332429] ata3.00: configured for UDMA/33
[90421.332452] ata3: EH complete
[90468.490426] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90468.490436] ata3.00: irq_stat 0x40000001
[90468.490452] ata3.00: cmd c8/00:80:80:c1:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90468.490457] res 51/40:5f:97:c1:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90469.142164] ata3.00: configured for UDMA/33
[90469.142189] ata3: EH complete
[90473.473919] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90473.473928] ata3.00: irq_stat 0x40000001
[90473.473945] ata3.00: cmd c8/00:80:80:c1:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90473.473950] res 51/40:6f:87:c1:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90475.239591] ata3.00: configured for UDMA/33
[90475.239616] ata3: EH complete
[90478.946279] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90478.946288] ata3.00: irq_stat 0x40000001
[90478.946304] ata3.00: cmd c8/00:80:80:c1:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90478.946309] res 51/40:6f:83:c1:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90479.597109] ata3.00: configured for UDMA/33
[90479.597133] ata3: EH complete
[90484.894645] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90484.894654] ata3.00: irq_stat 0x40000001
[90484.894671] ata3.00: cmd c8/00:80:80:c1:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90484.894676] res 51/40:6f:86:c1:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90486.660354] ata3.00: configured for UDMA/33
[90486.660379] ata3: EH complete
[90678.109600] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90678.109609] ata3.00: irq_stat 0x40000001
[90678.109626] ata3.00: cmd c8/00:80:00:d1:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90678.109631] res 51/40:4f:28:d1:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90679.876870] ata3.00: configured for UDMA/33
[90679.876892] ata3: EH complete
[90765.121150] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90765.121159] ata3.00: irq_stat 0x40000001
[90765.121175] ata3.00: cmd c8/00:80:00:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90765.121180] res 51/40:1f:52:d8:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90766.890930] ata3.00: configured for UDMA/33
[90766.890950] ata3: EH complete
[90784.634118] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90784.634127] ata3.00: irq_stat 0x40000001
[90784.634144] ata3.00: cmd c8/00:80:80:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90784.634149] res 51/40:00:fa:d8:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90786.402482] ata3.00: configured for UDMA/33
[90786.402504] ata3: EH complete
[90797.418633] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90797.418642] ata3.00: irq_stat 0x40000001
[90797.418658] ata3.00: cmd c8/00:80:80:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90797.418663] res 51/40:5f:95:d8:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90798.054298] ata3.00: configured for UDMA/33
[90798.054308] ata3: EH complete
[90828.768069] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[90828.768090] ata3.00: cmd c8/00:80:80:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90828.768095] res 40/00:5f:95:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[90828.768109] ata3: hard resetting link
[90829.277070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[90829.280646] ata3.00: configured for UDMA/33
[90829.291058] ata3: EH complete
[90835.043515] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[90835.043524] ata3.00: irq_stat 0x40000001
[90835.043541] ata3.00: cmd c8/00:80:80:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90835.043546] res 51/40:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x9 (media error)
[90836.808341] ata3.00: configured for UDMA/33
[90836.808363] ata3: EH complete
[90867.712052] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[90867.712073] ata3.00: cmd c8/00:80:80:d8:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90867.712078] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[90867.712093] ata3: hard resetting link
[90868.221059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[90868.224799] ata3.00: configured for UDMA/33
[90868.235048] ata3: EH complete
[90917.728067] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[90917.728088] ata3.00: cmd c8/00:80:00:d9:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90917.728093] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[90917.728107] ata3: hard resetting link
[90918.237071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[90918.241154] ata3.00: configured for UDMA/33
[90918.252187] ata3: EH complete
[90948.704049] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[90948.704069] ata3.00: cmd c8/00:80:00:d9:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90948.704074] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[90948.704089] ata3: hard resetting link
[90949.213059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[90949.216971] ata3.00: configured for UDMA/33
[90949.227054] ata3: EH complete
[90979.808073] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[90979.808094] ata3.00: cmd c8/00:80:00:d9:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[90979.808099] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[90979.808113] ata3: hard resetting link
[90980.317071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[90980.321610] ata3.00: configured for UDMA/33
[90980.332063] ata3: EH complete
[91044.704129] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[91044.704150] ata3.00: cmd c8/00:80:80:da:97/00:00:00:00:00/e7 tag 0 dma 65536 in
[91044.704155] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[91044.704169] ata3: hard resetting link
[91045.213061] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[91045.216769] ata3.00: configured for UDMA/33
[91045.227063] ata3: EH complete
[91586.720060] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[91586.720080] ata3.00: cmd c8/00:80:80:45:98/00:00:00:00:00/e7 tag 0 dma 65536 in
[91586.720085] res 40/00:6f:8a:d8:97/00:00:07:00:00/e7 Emask 0x4 (timeout)
[91586.720100] ata3: hard resetting link
[91587.280069] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[91587.284330] ata3.00: configured for UDMA/33
[91587.295056] ata3: EH complete
[91610.013120] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[91610.013129] ata3.00: irq_stat 0x40000001
[91610.013146] ata3.00: cmd c8/00:80:80:45:98/00:00:00:00:00/e7 tag 0 dma 65536 in
[91610.013150] res 51/40:00:f9:45:98/00:00:07:00:00/e7 Emask 0x9 (media error)
[91611.777849] ata3.00: configured for UDMA/33
[91611.777871] ata3: EH complete
[91666.784059] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[91666.784079] ata3.00: cmd c8/00:80:80:46:98/00:00:00:00:00/e7 tag 0 dma 65536 in
[91666.784084] res 40/00:00:f9:45:98/00:00:07:00:00/e7 Emask 0x4 (timeout)
[91666.784099] ata3: hard resetting link
[91667.293056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[91667.296778] ata3.00: configured for UDMA/33
[91667.307055] ata3: EH complete
[91799.581483] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[91799.581492] ata3.00: irq_stat 0x40000001
[91799.581509] ata3.00: cmd c8/00:80:00:63:98/00:00:00:00:00/e7 tag 0 dma 65536 in
[91799.581514] res 51/40:6f:0b:63:98/00:00:07:00:00/e7 Emask 0x9 (media error)
[91801.074089] ata3.00: configured for UDMA/33
[91801.074111] ata3: EH complete[/CODE][/SPOILER]edit2:
[SPOILER][CODE]smartctl 5.40 2010-10-16 r3189 [x86_64-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Model Family: Western Digital AV-GP family
Device Model: WDC WD10EVDS-63U8B0
Serial Number:
Firmware Version: 01.00A01
User Capacity: 1.000.204.886.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun May 1 15:18:04 2011 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 230) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always – 0
3 Spin_Up_Time 0x0027 189 130 021 Pre-fail Always – 3550
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always – 36
5 Reallocated_Sector_Ct 0x0033 173 173 140 Pre-fail Always – 210
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always – 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always – 3511
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always – 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always – 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always – 34
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always – 24
193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always – 22023
194 Temperature_Celsius 0x0022 111 104 000 Old_age Always – 36
196 Reallocated_Event_Count 0x0032 138 138 000 Old_age Always – 62
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always – 4
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always – 0
200 Multi_Zone_Error_Rate 0x0008 174 174 000 Old_age Offline – 5390SMART Error Log Version: 1
ATA Error Count: 63 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It “wraps” after 49.710 days.Error 63 occurred at disk power-on lifetime: 3510 hours (146 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 80 0b 63 98 e7 Error: UNC 128 sectors at LBA = 0x0798630b = 127427339Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————- ——————–
c8 00 80 00 63 98 e7 00 10:17:07.573 READ DMA
c8 00 80 80 62 98 e7 00 10:17:04.696 READ DMA
c8 00 80 00 62 98 e7 00 10:17:04.641 READ DMA
c8 00 80 80 61 98 e7 00 10:17:02.477 READ DMA
c8 00 80 00 61 98 e7 00 10:17:02.476 READ DMAError 62 occurred at disk power-on lifetime: 3510 hours (146 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 80 f9 45 98 e7 Error: UNC 128 sectors at LBA = 0x079845f9 = 127419897Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————- ——————–
c8 00 80 80 45 98 e7 00 10:13:41.119 READ DMA
ef 10 02 00 00 00 a0 00 10:13:41.108 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 10:13:41.107 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 10:13:41.107 SET FEATURES [Set transfer mode]Error 61 occurred at disk power-on lifetime: 3510 hours (146 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 80 8a d8 97 e7 Error: UNC 128 sectors at LBA = 0x0797d88a = 127391882Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————- ——————–
c8 00 80 80 d8 97 e7 00 10:01:03.033 READ DMA
ef 10 02 00 00 00 a0 00 10:01:03.022 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 10:01:03.021 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 10:01:03.021 SET FEATURES [Set transfer mode]Error 60 occurred at disk power-on lifetime: 3510 hours (146 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 80 95 d8 97 e7 Error: UNC 128 sectors at LBA = 0x0797d895 = 127391893Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————- ——————–
c8 00 80 80 d8 97 e7 00 10:00:20.140 READ DMA
ef 10 02 00 00 00 a0 00 10:00:20.139 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 10:00:20.138 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 10:00:20.138 SET FEATURES [Set transfer mode]Error 59 occurred at disk power-on lifetime: 3510 hours (146 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER ST SC SN CL CH DH
— — — — — — —
40 51 80 fa d8 97 e7 Error: UNC 128 sectors at LBA = 0x0797d8fa = 127391994Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— — — — — — — — —————- ——————–
c8 00 80 80 d8 97 e7 00 10:00:10.205 READ DMA
c8 00 80 00 d8 97 e7 00 10:00:00.626 READ DMA
ef 10 02 00 00 00 a0 00 10:00:00.626 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 10:00:00.624 IDENTIFY DEVICESMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3493 –
# 2 Conveyance offline Interrupted (host reset) 70% 3490 –
# 3 Short offline Aborted by host 90% 3486 –
# 4 Extended offline Interrupted (host reset) 10% 3485 –SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.[/CODE][/SPOILER] -
1. Mai 2011 um 20:05 Uhr #888569HisNTeilnehmer
Eine beliebige wird laufen, sofern sie nicht kleiner ist als alle anderen im Array. Und da kommt es auf jedes Byte an wenn ich mich richtig erinnere.
-
1. Mai 2011 um 22:05 Uhr #888577BörniTeilnehmer
11 Monate…Ich werd mich mal an Alternate wenden…
-
1. Mai 2011 um 22:05 Uhr #888576HawkTeilnehmer
Wo ist das Problem? ;)http://shop.ebay.de/i.html?_trkparms=65%253A1%257C66%253A2%257C39%253A1&rt=nc&_nkw=WD10EVDS&_dmpt=DE_Elektronik_Computer_Computer_Festplatten&_trksid=p3286.c0.m14&_sop=15&_sc=1Und wie genau ist dieses ca. 1 Jahr?Knapp drunter oder knapp drüber?Man hat ja 1 Jahr Garantie und zusätzlich 1 Jahr Gewährleistung.Einfach mal an Alternate wenden.
-
1. Mai 2011 um 22:05 Uhr #888578ZoldanTeilnehmer
Prinzipiell kannst du alle Festplatten >1TB nutzen, solange die neue gleichviele oder mehr Bytes hat als die alte. Alte Platte aus dem Array, neue rein, Rebuild, Fertig
-
2. Mai 2011 um 13:05 Uhr #888630spokekillerTeilnehmer
Börni;455027 said:
11 Monate…Ich werd mich mal an Alternate wenden…Also, zunächst einmal:1) Platten-Seriennummer hier eingeben und Garantie checken-> http://websupport.wdc.com/warranty/serialinput.asp?custtype=end&requesttype=warranty&lang=en2) Wenn die Platte noch in Garantie ist (davon gehe ich aus):- Checktool runterladen und die Platte einmal testen, das ist Pflicht.- Vorsichtig sein, du hast sehr viele Load Unload Cycles, ab einer gewissen Anzahl macht WD manchmal einen Garantieausschluss, das sagt Dir aber das Tool. Es gibt auch eine Windows-Fassung, aber da Du Linuxer bist wie ich, wirst du das wohl mit der LiveCD machen3) Wenn Platte eligibel für Austausch, dann über das Onlineformular den RMA starten. Im zuge dessen lege ich zusätzlich immer noch einen Ausdruck des Checktools und eine genauere Fehlerbeschreibung rein, das hilft manchmal bei vagen Fällen, ist aber kein Muss.Ich persönlich würde nicht über Alternate gehen. Laut Gesetz liegt die Beweislast bei Dir und Alternate muss sich keine Mühe geben, Dir innerhalb einer oder zwei Wochen eine neue Platte zu liefern.Wählst du so wie ich den Vorabaustausch bei WD, dann bekommst Du idR recht zügig ein neues Drive zugesandt und kannst deren Verpackung nehmen um Dein defektes innerhalb 4 Wochen zurückzusenden. 4) Soweit ich das sehe fängt Dein Rebuild nach Vorbereitung der neuen Platte automatisch wieder an, mußt Du halt über MD machen und ggf googelst dir ein Tutorial oder fragst hier nochmal nach.Ich glaub das wärs erstmal. :D[edit]PS: immer dran denken: besser als ein Spare Drive ist ein Backup des wichtigsten Krempels… spätestens ab 1 TB Datenverlust tuts weh (meist schon viiiiiiel früher).Achja, und : keine Panik…. Panik? …. Panik!!!!Good Luck[/edit]
-
2. Mai 2011 um 13:05 Uhr #888631spokekillerTeilnehmer
Dank Deines Smart Ausdrucks kann jeder Deine Platte checken, … also das gute Stück hat noch Garantie seitens WD bis Oktober 2013…. also kein Grund zum traurig sein. Trotzdem erstmal schnell ein neues Drive besorgen und das RAID wieder stabil bekommen.
-
2. Mai 2011 um 15:05 Uhr #887308BörniTeilnehmer
jo, hab mir erstmal eine WD10EARS bestellt, vor 2 Wochen ist meine Laptopfestplatte auch kaputt gegangen, da hatte ich aber sofort eine austauschplatte da. Werde das dann in Ruhe machen, vielleicht kann ich beide gleichzeitig einschicken
-
-
AutorBeiträge
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.